User manual SAMSUNG VE-GA 140S

[. . . ] ENGLISH NOTE This camera will not function without a battery. Use one 3V lithium battery(CR-123A or DL-123A). The lens cap automatically opens when the Power button is turned on. Do not open the lens cap with your fingers. The shutter does not operate in the following circumstances: When the camera has no battery or when the battery is almost drained. [. . . ] Changing "Date" format or selecting the caption <No print> Press the DATE button to select one of the different formats. (Refer to the left sequences) The "PRINT" mark on the LCD panel will blink during the print. 2. Date Zone <Year-Month-Day> <Month-Day-Year> <Day-Month-Year> <Day-Hour-Minute> <Normal picture> <Panorama shot> NOTE <Selecting caption print> Under certain circumstances, the date will not print on the final frame of a film. 20 3. Changing the date setting To change the date or time, press and hold down the DATE button for 2 seconds. The first sector of the date format will blink. To select the sector that you want to change, press the DATE button. Change the date setting by operating zoom buttons. TELE button to increase, WIDE button to decrease. NOTE Example This camera will set the date automatically until 2099. 2000 > "00" A year mark will be indicated by the last 2 digits on the LCD panel. It will be indicated by 4 digits on the picture. Sometimes the 2001 > "01" year is marked by 2 digits. Under these circumstances the camera will operate as normal. MESSAGE CAPTIONS When the LCD panel shows "CP-1"(refer to the previous CP-3 THANK YOU picture ), you can select one of seven captions as follows: CP-4 CONGRATULATIONS To change the captions, operate the zoom buttons. ("T" or "W") CP-5 A HAPPY NEW YEAR CP-1 I LOVE YOU!Selecting the caption print NOTE CP-6 MERRY X-MAS CP-7 HELLO!The camera will print either a date or a caption. You cannot select both date and caption on the same picture. (The caption is printed on the date zone. ) Remember to reset the date and time after changing the battery. 21 CLOCK/CALENDAR FUNCTION(NON Q. D. Clock/Calendar function With the Non Q. D. version there is a facility to check the time and date via the LCD panel. Simply press the TIME button to select the display you require. NOTE <Year-Month-Day> On the Non Q. D model, the date/time will not print on your pictures. 2. Changing the date setting <Month-Day-Year> <Day-Month-Year> <Day-Hour-Minutes> To change the date or time, press and hold down the TIME button for 2 seconds. The first sector of the date format will blink. To select the sector that you want to change, press the TIME button. Change the date setting by operating zoom buttons. 22 USING THE SHOOTING MODE You can select the shooting mode by turning the dial clockwise or counterclockwise. [. . . ] Did you compose a subject correctly referring Read the "Viewfinder and Indicators" to the picture area frame?Did you set the camera to the panorama mode?Page 14 8 42 Page 13 9 10 47 SPECIFICATIONS TYPE Format Speed FILM Loading Winding Rewinding LENS SHUTTER 35mm fully automatic lens shutter camera. 35mm DX-coded film, 24x36mm Automatic setting with DX-coded film, ISO 50~3200 Automatic advance to the first frame when the back cover is closed. [. . . ]