User manual SAMSUNG VM-MX20R QUICK GUIDE (VER.1.0)

[. . . ] Do not use provided power supply units with other equipment. - The battery pack: used for outdoor recording. - The AC power adapter : used for indoor recording and playing back. [. . . ] Even with the power switched off, the battery pack will still discharge if it is left attached to the memory camcorder. It is recommended that you remove the battery pack from the memory camcorder. You can record on the built-in memory or a memory card, so you should select the desired storage media before starting recording or playback. Before inserting or ejecting the memory card, turn the memory camcorder off. "Card": When using the memory card. Slide the memory card slot cover to the right to open the cover. Insert the memory card into the memory card slot in the direction of the arrow shown in the diagram until it softly clicks. Slide the memory card slot cover to the right to open the cover. Slightly push the memory card inwards to pop it out. Pull the memory card out of the memory card slot and close the cover. Memory camcorder provides two Recording start/stop buttons. Connect a power source to the memory camcorder. (A battery pack or an AC power adapter) · (VP-MX20C/MX20CH only) (If you want to record on a memory card, insert the memory card. Pressing the Recording start/stop button again during recording will set the memory camcorder to recording pause mode. When recording is finished, turn the memory camcorder off. You can find a desired movie image quickly using thumbnail index view. (VP-MX20C/MX20CH only) (If you want to record on a memory card, insert the memory card. The recorded movie images are displayed in thumbnail index view. [. . . ] It is recommended to use the AC adapter as the power supply instead of the battery pack. When the USB cable is connected, turning on or off the camcorder causes malfunctions of the PC. To playback your recordings, the television must be PAL compatible. [. . . ]