User manual SAMSUNG VP-D23

[. . . ] Notes regarding Moisture Condensation 1. A sudden rise in atmospheric temperature may cause condensation to form inside the Camcorder. for example: - When you move the Camcorder from a cold location to a warm location (e. g. from outside to inside during winter. ) - When you move the Camcorder from a cool location to a hot location (e. g. [. . . ] However, there may be tiny dots (red, blue or green in color) that appear on the LCD screen. These dots are normal and do not affect the recorded picture in any way. When you use the LCD screen under direct sunlight or outdoors, it maybe difficult to see the picture clearly. If this occurs, we recommend using the Viewfinder. Direct sunlight can damage the LCD screen. Notes regarding the Hand Strap - To ensure a steady picture while filming, check that the hand strap is properly adjusted. - Do not force your hand into the hand strap as you could damage it. 3 Getting to Know Your Camcorder Front & Left View 1. LED light (VP-D353(i)/D354(i)/D355(i) only) 6. Remote sensor (VP-D353(i)/D354(i)/D355(i) only) 4. LED light (VP-D353(i)/D354(i)/ D355(i) only) 3. Remote sensor (VP-D353(i)/D354(i)/ D355(i) only) 4. Playback on the LCD Screen It is practical to view a tape using the LCD screen when in a car or outdoors. Playback on a TV Monitor To play back a tape, the television must be PAL compatible. We recommend that you use the AC Power adapter as the power source for the Camcorder. Connecting to a TV which has Audio/Video input jacks 1. Connect the Camcorder and TV with the Audio/Video cable. The yellow jack: Video The white jack: Audio(L)-mono The red jack: Audio(R) - If you connect to a monaural TV, connect the yellow jack (Video) to the video input of the TV and the white jack (Audio L) to the audio input of the TV. Turn on the TV and set the TV/VIDEO selector on the TV to Video. Notes S-Video input TV Video input-Yellow Audio input (left)-White Audio input (right)-Red Camcorder Connecting to a TV which has no Audio and Video Input Jacks You can connect your Camcorder to a TV through a VCR. Connect the Camcorder to your VCR with the Audio/Video cable. The yellow jack: Video The white jack: Audio(L) - Mono The red jack: Audio(R) 2. Set the Power switch to PLAYER. Antenna S-Video VCR S-Video input Video input-Yellow Audio input (left)-White Audio input (right)-Red Camcorder TV Audio/Video 4. [. . . ] If the VCR has an S-Video input terminal, you may use S-Video for better quality. The S-Videoterminal transmits video only. If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L). 7 Basic Recording Making your First Recording 1 Connect a power source to the Camcorder. (A Battery pack or a AC Power adapter) Insert a cassette. [. . . ]