User manual SAMSUNG WA10V5WEP

[. . . ] WA13V5 WA12V5 WA11V5 WA10V5 Washing Machine user manual imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www. samsung. com/register WA10V5-02596H_EN. indd 1 2009-03-20 ¿ÀÈÄ 2:38:43 features · Air Turbo Drying System Air Turbo technology spins hard and fast so you can spend less time drying. Time Saving AIR TURBO saves your time, ensuring your clothes are dried 30%-40% faster than line drying alone. Especially during the rainy season and in high-humid weather, laundry that once took days to drip-dry, such as heavy jeans, bulky sweaters, and thick blankets are dried more rapidly. [. . . ] Detects the amount of laundry, and determines wash and rinse time period automatically. When the Function button is pressed during working, the rinse times can be changed to between 2 to 5 times in duration. RINSE AND SPIN Press the Function button five times. When the Function button is pressed during working, the rinse times can be changed to between 2 and 5 times in duration. once twice three times four times five times 10_manual functions WA10V5-02596H_EN. indd 10 2009-03-20 ¿ÀÈÄ 2:38:45 installation & maintenance The User's Manual is for common use. Make use of the User's Manual depending upon your washing machine model. ENVIRONMENT Leave some space - Maintain at least 10cm between the washer and the wall. Place the washer on a sturdy flat surface. - If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1°) Adjust the legs for even placement. - Do not place the washer in steamy rooms or where the washer is directly exposed to rain. Moisture may destroy the electrical insulation causing an electrical shock hazard. - As plastic an electrical components are affected by direct heat, never place the washer near furnaces, boilers, etc. Do not place under direct sunlight. LEVELLING If the washer is not leveled with the ground, it makes the machine tremble more or be out of order. So, make sure that the washer is leveled properly. SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING THE POSITION OF THE WASHING TUB. · Open the lid of the machine, pour water into the tub up to the level Water just below the pulsator, and adjust the legs so that the pulsator is positioned at the center of the water as shown in the figure. · Place the machine more than 10 cm away from the wall. · Adjust the legs on feet for levelling. CONNECTING THE WATER SUPPLY HOSE 1. Remove the adaptor from the water supply hose. c LOOSEN 4. LOCK Connect the water supply hose to the adaptor. Pull down the part (c) of the water supply hose. When the part (c) is released, the hose is automatically connected to the adaptor making a `click' sound. Connect the other end of the water supply hose to the inlet water valve at the back of the washer. Screw the hose clockwise all the way in. 2. First, using a "+" type screw driver, loosen the four screws on the adaptor. [. . . ] . filter check ). & & . + / FILTER CHECK 1 8 9 _ WA10V5-02596H_AR. indd 7 3/20/2009 3:54:02 PM / . [. . . ]