User manual SAMSUNG WA12UP

[. . . ] above the ground. cap-hose outlet-hose HOW TO CONNECT WATER SUPPLY HOSE A tap of ordinary type is desirable In case of square tap ° <Take out the internal part of the connector and join it in the following way. ORDINARY TAP SQUARE TAP ROTATING TAP Internal part 1. Remove the adaptor from the water supply hose. 4. Connect the water supply hose to the adaptor. Pull down the part (c) of the water supply hose . When you release part (c) the hose is automatically connects to the adaptor making a 'click' sound. 5. Connect the other end of the water supply hose to the inlet water valve at the top of the washer. [. . . ] 2. Open the cover as shown in the figure. Close the cover and insert the lower part of the filter in the basket first and then push the filter with "click" sound . HOW TO ADD THE DETERGENT LEVELLING q Adjust the height control legs to make eve. Lock Lock Nut Adjustable Leg UNLOCK LOCK 1. Open the detergent box by pulling in the direction of the arrow as shown in the figure. Add the amount of detergent for one washing evenly in the box so that the detergent does not overflow the box. HOW TO ADD THE FABRIC SOFTENER q When a proper amount of fabric softener is stored in the box, it is automatically added in at the final rinse cycle. q In case the hot water only is connected, this function will not be operated. Unlock q After slightly lifting up the machine, rotate the adjustable leg counter-clockwise and pull as much as need to adjust the heigh. Fabric softener q After putting down the machine after adjustment. q When too much softener is stored above the base line, it may not be operated properly. UNLOCK LOCK CLEANING THE FILTER (pump drained washer) UNLOCK LOCK Lock Unlock 1. 4. Place a rag under washer filter not to wet the floor. Reassemble in reverse order. q Adjust the height and secure. q Secure the lock nut by rotating it firmly. q If the lock nut is not secured, the adjustable leg may be release. ONLY FOR THE MODEL WITH PLASTIC BASKET. q When a proper amount (one time does) of fabric softener is stored in the softener inlet, it is automatically put in at the last rinsing cycle. Press the course select button once. COURSE 2. Press the START/HOLD button. Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD button again. You can change the course when paused. START HOLD FUZZY HEAVY DUTY ECONO WASH WOOL BLANKET 3. Press the START/HOLD button Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD button again. You can change the course when paused. START HOLD FUZZY HEAVY DUTY ECONO WASH WOOL BLANKET ex) \High level 3. Close the lid. is ECONO WASH, ECONO WASH COURSE Because washingor less stained laundry. it is good for light WOOL COURSE Extra low water level is not available. Cold water is selected. 1. Press the power button to "ON". POWER 1. Press the power button to "ON". POWER 2. Press the course select three times. Press the course select button twice. COURSE COURSE FUZZY HEAVY DUTY ECONO WASH WOOL BLANKET ex) High level 3. Press the START/HOLD button. Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD button again. You can change the course when paused. START HOLD 3. Press the START/HOLD button Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD button again. You can change the course when paused. START HOLD 4. [. . . ] Press the START/HOLD button once. POWER COURSE FUNCTION Function Button START HOLD twice DRIP DRY Press the POWER button. Select the course(Press the course button). q FUZZY, HEAVY DUTY, ECONO WASH, WOOL, BLANKET. Press the FUNCTION SELECT button three times. [. . . ]