User manual SAMSUNG WS-32Z10HV

[. . . ] COLOUR TELEVISION WS32Z10 CS34A10 Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE (PIP) TELETEXT Safety Instructions ENG N Do not expose the television to extreme temperature conditions or to extreme humidity conditions. N Do not expose the television to direct sunlight and other sources of heat. N Do not expose the television to any liquids. N Never put objects of any kind into the television, and do not place a water-containing vessel on the television. [. . . ] ) 2 Move Enter Return Press the ENTER ( 3 Wide CRT Size Press the or . . . Result: Depending on the model, the following modes are available: Auto wide Wide Panorama N Wide CRT: Auto wide - Wide - Panorama - Zoom1 - Zoom2 - 4:3 Move Enter Return N You can control the vertical size and position of the screen by using the or . . . button in Auto wide mode when the vertical size is changed automatically by Auto wide mode. N If the video signal lacks WSS signal in Auto wide mode, the system will automatically increase the vertical size. In this case, Subtitle on/off action there may be flickering. If you want to disable, change the picture size to another mode. . . . oe Adjust VGA mode (Position adjustment) N Normal (4:3) CRT: Normal - Zoom1 - Zoom2 - Wide Normal - 16:9 (In the DTV mode) . . . oe Size VGA mode (Size adjustment) N You can select these options by simply pressing the P. SIZE ( ) button on the remote control. At this time, lifting is available in the Zoom1 or Zoom2 mode by pressing the or . . . N If the PC is connected, you can adjust the VGA mode by using the oe, , , or . . . button. 4 Press the oe or button to change the setting. When you are satisfied with the setting, press the ENTER ( ) button to store. You can shift the screen to your required position in the VGA mode by pressing the P. SIZE ( ) button followed use the oe, , , or . . . To adjust the screen size, press the P. SIZE ( ) button again followed use the oe, , , or . . . button. 28 Extra Picture Settings ENG N Scan Mode You will normally find that scan mode is best set to Natural Scan to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC-M) may benefit by changing the scan mode. The Natural Scan, Digital Scan and Progressive modes are available. N Digital NR If the signal received by your television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. N DNIe (Digital Natural Image engine ) Move Picture Picture Mode Custom Picture Scan Mode Digital NR DNIe PIP More Enter Return : Natural Scan Natural Scan : Off Digital Scan : On Progressive : Dynamic Picture Picture Mode Custom Picture Scan Mode Digital NR DNIe PIP More Move Enter Return : Dynamic : Natural Scan : Off Off : On On This feature bring you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, much detailed image to you. DNIeTM technology will fit every signals into your eyes. N Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen mode to Off. [. . . ] The correct setting of size (resolution) is 640 x 480 pixels. If a vertical-frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box. 56 Programming the Remote Control for Other Components ENG This TV's remote control can operate almost any VCR, Cable box, or DVD, in addition to controlling the TV. 1 2 The remote control might not be compatible with the TV manufactured by another company. VCR Turn off your VCR, Cable box, or DVD. Press the SELECT button repeatedly to activate another component (TV, VCR, CATV, DVD). [. . . ]