User manual SAMSUNG WS-32Z31HSQ

[. . . ] During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. Do not step on or twist the power cord. Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Please use a soft and dry cloth (not containing volatile matter) when you clean the TV. [. . . ] Press the or button to select Channel. Press the or button to select C (Air channel) or S (Cable channel). Press the or button to select indicate the required number. You can also select the channel number directly by pressing the numeric buttons (0~9). TV Manual store Prog. No. Colour system Sound system Channel Search Store : : : : : : P 3 ----Auto BG C2 48MHz ? TV Manual store Prog. No. Colour system Sound system Channel Search Store : : : : : : P 3 ----Auto BG C2 48MHz ? 10 If no sound or abnormal sound, re-select the sound standard required. If you do not know the channel numbers, select Search by pressing the or button. Press the - or + button to start the search. Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen. TV Manual store Prog. No. Colour system Sound system Channel Search Store : : : : : : P 3 ----Auto BG C2 48MHz OK 11 To store the channel and associated programme number, select Store by pressing the or button. Repeat Steps 9 to 11 for each channel to be stored. 12 Channel mode P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to max P99. You can select a channel by entering the position number in this mode. Result: The options available in the Fine tune group are displayed with Tune is selected. Fine tune 6 To obtain a sharp and clear picture and good sound quality, press the - or + button. Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by pressing the - or + button. 7 To memorise adjusted picture or sound, select Store by pressing the or button. Result: OK is displayed. TV Tune Store Erase Fine tune : -/+ : OK :? 8 To erase adjusted picture or sound, select Erase by pressing the or button. Result: OK is displayed. TV Tune Store Erase Fine tune : -/+ :?:OK 20 Changing the Picture Standard ENG You can select the type of picture which best corresponds to your viewing requirements. TV Mode Adjust Digital NR Picture oe Dynamic : Off 1 Press the MENU button. Result: The options available in the Picture group are displayed. 2 Press the - or + button. Result: The Mode is selected. 3 Select the required picture effect by pressing the - or + button repeatedly. Result: The following picture effects are available: Dynamic - Standard - Movie - Custom. You can also set these options simply by pressing the P. STD (Picture Standard) button. 21 Adjusting the Picture Settings ENG TV Mode Adjust Digital NR Picture oe Dynamic : Off Your television has several settings which allow you to control picture quality. 1 Press the MENU button. The options available in the Picture group are Result: displayed. Result: The options available in the Adjust group are displayed. 2 3 TV Contrast Brightness Sharpness Colour Colour tone Adjust : : : : : 70 50 40 60 50 4 group You can also display thisbutton. simply by pressing the P. MENU (Picture Menu) 5 Contrast 70 Press the or button to select the option (Contrast, Brightness, Sharpness, Colour, Colour tone or Tint-NTSC only) to be adjusted. [. . . ] " 2 " so that you can redirect the signal from " 1" 1 " to Connecting to the Audio Output The "MONITOR AUDIO OUT" (RCA) connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect). Rear of the TV Audio system 35 Connecting to the RCA Input ENG The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment, such as camcorders, video disc players, and some video game devices. Camcorder Side of the TV Video game device Video disc player Connecting to the S-Video Input The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV Camcorder and VCR To play pictures and sound, both the S-VIDEO and RCA connectors must be used. When both the side AV and rear connectors are connected to external equipments, the side AV receives priority. Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. 36 Connecting Headphones ENG You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room. Side of the TV 1 Plug a set of headphones into the 3. 5 mm mini-jack socket of the television. Result: The sound is heard through the headphones. 2 When you wish to hear the sound through the speakers again, simply disconnect the headphones. Prolonged use of headphones at a high volume may damage your hearing. Viewing Pictures From External Sources Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. 1 2 Check that all the necessary connections have been made. [. . . ]