User manual SAMSUNG WS-32Z40HTQ

[. . . ] During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. Do not step on or twist the power cord. Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Please use a soft and dry cloth (not containing volatile matter) when you clean the TV. [. . . ] You can select a channel by entering the position number in this mode. C (Real channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. Manual store Colour system Sound system Search Channel Prog. No. Store : : : : : : Auto BG 46MHz C1 P 3 ----OK Select Adjust Exit 15 Assigning Names to Channels ENG Channel Auto store Manual store Name Add/Erase Fine tune Sort Exit Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU button. or button to select Channel. 2 Select Enter Press the Result: The options available in the Channel group are displayed. P P P P 1 2 3 4 : : : : Name ----------------- 3 4 5 Press the - or + button. Press the or button to select Name. Press the - or + button. Result: The current channels are displayed. Select Adjust Exit 6 7 8 If necessary, select the channel to be assigned to a new name by pressing the or button. Press the or button to select a letter (A~Z), a number (0~9) or a symbol (-, space). Move on the previous or next letter by pressing the - or + button. Repeat Steps 6 to 8 for each channel to be assigned to a new name. P P P P 1 2 3 4 : : : : Name A---------------- 9 Adjust Select Exit 16 Skipping Unwanted Channels ENG You can exclude the channels you chosen from the channels you scanned. Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by pressing the - or + button. Contrast 70 Color tone Cool 50 Warm If you make any changes to these settings, the picture standard is automatically switched to Custom. The television has an "automatic degaussing" system that is activated if magnetic interference is present. To degauss the television screen, switch power off by pressing the " " (On/Off) button on the front panel. (Refer to "Automatic Degaussing to Remove Colour Patches" on page 38. ) 20 Extra Picture Settings ENG Scan mode You will normally find that scan mode is best set to Natural to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC-M) may benefit by changing the scan mode. Natural, Digital and Progressive modes are available. Digital NR If the signal received by your television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. Tilt If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting. LNA This feature is very useful in the situation that the TV is used in a weak signal and amplifies the TV signal in the weak signal area, but not noise. This feature is working only in a weak signal condition, and that is memorized on current channel, additional. Picture ¦ Dynamic Mode Adjust Scan mode : Natural Digital NR : Off Tilt :0 LNA : Off Select Adjust Exit Picture ¦ Dynamic Mode Adjust Scan mode : Natural Digital NR : Off Tilt :0 LNA : Off Select Adjust Exit 1 Press the MENU button. [. . . ] Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. 36 Connecting Headphones ENG You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room. Side of the TV 1 Plug a set of headphones into the 3. 5 mm mini-jack socket of the television. Result: The sound is heard through the headphones. 2 When you wish to hear the sound through the speakers again, simply disconnect the headphones. Prolonged use of headphones at a high volume may damage your hearing. Viewing Pictures From External Sources Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. 1 2 Check that all the necessary connections have been made. Switch your television on, then press the VIDEO button repeatedly. [. . . ]