User manual SAMSUNG WS-32M66V OPEN SOURCE GUIDE (VER.1.1)

[. . . ] Switching Your Television On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Placing Your Television in Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Becoming Familiar with the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plug & Play Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ) button. 3 4 5 6 Press the ENTER ( Fine Tune P1 1 Press the or button to select Fine Tune. Press the ENTER ( ) button. Move Reset oe Adjust Save Return To obtain a sharp and clear picture and good sound quality, press the oe or button. Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by pressing the oe or button. 7 To store the fine tuning setting in the TV's memory, press the ENTER ( ) button. Result: Channel indicator turns into Red. 8 To erase adjusted picture or sound, select Reset by pressing the or button. Result: Channel indicator returns to its original color. ) button to exit. 9 When you have finished, press the EXIT ( English-21 Using the LNA (Low Noise Amplifier) feature (depending on the model) TV . . . More Fine Tune LNA Channel oe On This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. This feature is working only weak signal condition, and that is memorized on current channel, additional. 1 Press the MENU ( Result: ) button. The main menu is displayed. Move oe Adjust Return 2 Press the or button to select Channel. Result: The options available in the Channel group are displayed. ) button to exit. Color Tone Normal 6 When you have finished, press the EXIT ( English-25 Selecting the Picture Size (depending on the model) You can select the picture size which best corresponds to your viewing requirements simply by pressing the "P. SIZE ( )" button. Depending on the model, the following picture sizes are available: Normal, Zoom1, Zoom2, 16:9 16:9, Panorama, Zoom1, Zoom2, 4:3 TV Mode Custom Color Tone Size Digital NR More Move Picture : Dynamic : Normal oe Normal : On 1 Return Press the MENU ( Result: ) button. oe Adjust The main menu is displayed. 2 Press the or button to select Picture. Result: The options available in the Picture group are displayed. ) button. 3 4 5 6 Press the ENTER ( Press the or button to select Size. Press the oe or button to select the picture size. When you have finished, press the EXIT ( ) button to exit. Selecting the Digital NR If the signal received by your television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. TV Mode Custom Color Tone Size Digital NR More Move Picture : Dynamic : Normal : Normal oe On 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Return Press the or button to select Picture. Result: The options available in the Picture group are displayed. ) button. oe Adjust 3 4 5 6 English-26 Press the ENTER ( Press the or button to select Digital NR. To activate this feature, select On by pressing the oe or button. When you have finished, press the EXIT ( ) button to exit. Using the Tilt Control Feature If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting. TV . . . More Tilt PIP Picture oe3 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Press the or button to select Picture. [. . . ] Result: The page is displayed with other colored information that can be selected in the same way. 3 4 To display the previous or next page, press the corresponding colored button. To display the subpage, see the following steps. Sub-pages can be scrolled by using the TURBO (Red) or S. MENU (Green) button. Storing Teletext Pages (depending on the model) You can store up to four teletext pages to display them later at leisure. 1 Select the LIST mode using the Result: button. 2 3 4 5 Four 3-digit numbers are displayed in different colors. The button is used to switch between the LIST and FLOF (or FASTEXT) modes. Press the colored button corresponding to the page that will be replaced. Enter the new page number using the numeric buttons. [. . . ]