User manual SAMSUNG WS-32Z78R

[. . . ] COLOUR TELEVISION Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE (PIP) TELETEXT / TELEWEB (OPTION) Safety Instructions ENG N Do not expose the television to extreme temperature conditions or to extreme humidity conditions. N Do not expose the television to direct sunlight and other sources of heat. N Do not expose the television to any liquids. N Never put objects of any kind into the television, and do not place a water-containing vessel on the television. [. . . ] This feature is working only weak signal condition, and that is memorized on current channel, additional. Language Time Teletext Source Plug & Play AV Setup LNA Move: Function English Main 1 2 Press the MENU button. Result: Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. Move the joystick up or down until the LNA is selected. The LNA menu is displayed with the current channel Result: automatically is selected. Select the required channel by moving the joystick up or down. Select On or Off by moving the joystick up or down. Press the joystick button ( ) to confirm. Enter: LNA 1 2 3 4 5 6 7 8 9 10 11 12 13 ----DSF ----MTV KBS1 MBC ----KBS2 ZDF ARD SUPER VIVA2 3 SAT 3 4 Off Move: Enter: Exit:TV 5 6 LNA 1 2 3 4 5 6 7 8 9 10 11 12 13 ----DSF ----MTV KBS1 MBC ----KBS2 ZDF ARD SUPER VIVA2 3 SAT On Sel. : Store: Exit:TV Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the "STILL" button. To return to normal viewing, press it again. If you press the STILL button when the PIP feature is activating, you can freeze the sub picture. Power 23 Changing the Sound Standard ENG You can use your remote control to select the type of special sound effect to be used when watching a given broadcast. The following sound effects are available: N Custom, Standard, Music, Movie, Speech. To select the required sound effect, simply press the S. STD (Sound Standard) button on the remote control. Adjusting the Sound Settings Your television has several settings which allow you to control sound quality. Sound Adjust Headphone Dolby Digital Ext. mute Move: Custom 1 2 3 Press the MENU button. Result: Move the joystick up or down until the Sound is selected. The options available in the Sound group are displayed. The Adjust menu is displayed with the current option. Result: Select the option to be adjusted by moving the joystick up or down. Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by moving the joystick left or right. Volume Off Enter: Adjust(Custom) Volume Bass Treble Move: Adjust: Store: 4 5 6 When you are satisfied with the settings, press the joystick button ( ) to store them. If you make any changes to these settings, the sound standard is automatically switched to Custom. 24 Adjusting Your Headphone Preferences ENG You can adjust the headphone settings to suit your preferences. The following headphone settings are available: N Volume, Bass, Treble, Balance. Sound Adjust Headphone Dolby Digital Ext. mute Move: Custom 1 2 3 4 Press the MENU button. Result: Move the joystick up or down until the Sound is selected. The options available in the Sound group are displayed. [. . . ] Otherwise, just click OK and exit the dialog box. 45 SCART Connector Wiring (EXT1, EXT2 or EXT3) ENG If you wish to connect other equipment via the SCART connectors on your television, contact your dealer or a qualified technician to wire the A/V cable as illustrated below. Pin 1 2 3 4 5 6 7 8 9 10 11 Signal Audio output R Audio input R Audio output L Audio chassis return Video chassis return (RGB blue) Audio input L RGB blue input Switching voltage Video chassis return (RGB green) AV-Link (Ext 1) RGB green input Pin 12 13 14 15 16 17 18 19 20 21 Signal Video chassis return (RGB red) RGB red input Blanking signal (RGB switching) Video chassis return Blanking signal ground Video output Video input Screening/chassis return Pins 5, 7, 9, 11, 13, 15 and 16 are used for RGB processing and are only wired on the EXT1 or EXT3 connector. Wiring the Mains Power Supply Plug (UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. [. . . ]