User manual SAMSUNG WS-7500A2 INTRODUCTION

[. . . ] Young children should be supervised to ensure that they do not play with the appliance. If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similary qualified person in order to avoid a hazard. Place clothes evenly into the washer as unevenly distributed laundry may cause excessive out-of-balance noise and vibration. Don't use excessively hot water. [. . . ] Put the cloths into the wash tub and set the same water pressure to fill the tub so as not to exceed "H3" level. WASHING PROCEDURE SPIN 1. Distribute laundry evenly in the basket after drain. (Uneven laundry may cause ABNORMAL NOISE. ) 2. Distribute laundry evenly in the basket before spinning. (Uneven laundry may cause ABNORMAL NOISE. ) 5. Set the CYCLE SELECTOR KNOB to "Spin" 3. Close the lid In case of a abnormal vibration and noise. return the "DRAIN/SPIN TIMER" to the "0" postion and then Distribute laundry evenly. RINSE 1. Set the CYCLE SELECTOR KNOB to "WASH RINSE" 4. After finsing, set the CYCLE SELECTOR KNOB to "DRAIN" 2. Set the same water pressure to fill the tub so as not to exceed "H3" level. 5. Set the DRAIN/SPIN TIMER for drain "H". (In case of need more drain, repeat the no 2) Please adjust the drain time like H, M, L depend on the water level. M : Medium water level L : Low water level. Set the WASH TIMER 2~3 minutes. 5 INSTALLTION ENVIRONMENT Leave some space Maintain at least 10cm between the washer and the wall. Place the washer on a sturdy flat surface. If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1°) Adjust the legs for even placement. [. . . ] Follow the instruction detergent printed on the package for amount of detergent. - Choose the amount of detergent depending on the fabric type. TROUBLE SHOOTING TROUBLE Washing machine won't work. CHECK POINT Is the water tap opened?Is the laundry spread evenly in the washer? [. . . ]