User manual SAMSUNG YP-20S EUROPE

[. . . ] - It is possible of Quick Play on the clock mode. To skip to the next music while one is running Press the FF button ( forward. ) twice to move one track button on the yepp, then press the To search music in stop mode 1 Press the FF button ( ) to move one track forward. To playback the song that you choose, press the Play button ( ). 2 Press the REW button ( Note ) to move one track backward. Control Volume Press the button. Control volume with the volume control button ( / ) on the yepp. Note You can control volume from 0 to 20. [. . . ] Each time the / button is pressed shortly, the modes will be changed in the order of CLASSIC, JAZZ, ROCK and NORMAL. 4 Hold mode Press the button long on the MP3 mode to change to setup mode. Press the / button to select the Hold, then press the button. Note On Hold mode, no button on system won't work. Each time a button is pressed, Hold message will shortly appears. In order to stop Hold mode, press the button long. 1 Connect the USB cable to the USB port of the computer. 2 Turn on the yepp and connect the other end of the cable to the download connector. Note - Make sure to install the yepp explorer before connecting your yepp to PC or Mac. When the message "Add New Hardware Wizard" appears on the screen, click [Cancel] and then install the yepp explorer. - Please refer to next page when USB driver is not installed automatically. Erase mode Press the button long on the MP3 mode to change to setup mode. Press the / button to select the Erase, then press the button. The message "ERASE?" will appear, then press the button. Note - After erasure, your yepp will display next song title and then be turned to the primary display automatically. - Erasure will not be done during play mode. - Press the button to cancel the erasure. Minimum PC System Requirements Pentium 133MHz at least Windows 98/2000 Mac OS 8. 6~9. 0. 4 20MB Free Disk Space CD-ROM Drive (Optimum: 8X and more) - Built-in USB Port 5 - English Setting the Modes (continued. . . ) Connecting yepp to PC or Mac Installing Software on PC Insert the Installation CD into the CD-ROM drive. The picture below appears when you insert the CD. Installing Software on Mac Insert the Installation CD into the CD-ROM drive. 1 Execute the yepp explorer. - Double-click the yepp explorer icon. 1 Click 2 Click the button on each successive window. - After all installations are completed, the yepp explorer folder will be created. Installing USB Driver After the software is installed, connect an USB cable to the PC. Then, the USB driver is automatically installed. If the driver is not automatically installed and the message "Add New Hardware Wizard" appears on the screen, do as follows; Click 1 Click the next button on each successive window. 2 When the driver selection 2 Click the next button on each successive window. Note Install the other program or download the files depending on your requirement. screen appears, insert an installation CD and select a CD-ROM Driver. 3 After the installation is complete, re-boot the PC. Click 6 1 Execute the yepp explorer. - Double-click the icon of the Baby yepp Explorer on the desktop. To set the preferences, click the [Environment] and [Options Ctrl+O] on the yepp explorer. To save the changes, click [OK]. 2 Click [File], [Format] and select [OK]. Note - Before formatting the flash memory, connect your yepp to PC and click Refresh icon ( ) on the yepp explorer. [. . . ] x Avoid to keep the yepp in the high humidity, temperature and strong magnetic area. x Do not use thinner, alcohol, or benzene when you clean the your yepp. It may damage it. Troubleshooting The software does not work. - Refer to pages 5~6. The message "BAD SONG" appears. - This message appears when the file does not meet the MP3 format. The player does not work or nothing is displayed on the LCD. - Check the capacity of the battery. [. . . ]