User manual SAMSUNG YP-780

[. . . ] Yepp packages use cardboard, polyethylene etc. , and do not use any unnecessary materials. 4 Please be aware that we disclaim all responsibility for damages from loss of saved or recorded data due to breakdown, repair or other causes. 5 ENG Earphones Featuring an Encoding Function You can make a MP3 file out of an source using the ENC jack on the main unit. You can also convert an FM radio program into an MP3 file in real time. Touchpad operation You can easily operate the functions you want by using the touchpad. Supports 3D surround sound You can feel the deep base and 3D surround sound. MP3 & WMA Playback MP3 is an MPEG1 Layer3 audio format. WMA is a Microsoft Windows Media audio format. is a trademark of SRS Labs, Inc. [. . . ] Press the , buttons to adjust the volume. 00:01:30 vol 001 NOR 20 Turn off the power by pushing down the power Note The volume can be adjusted in increments between 0 and 40. Press the , buttons once to adjust the volume by one step. During encoding, there is no beeping sound and the button lights and backlight do not illuminate. 2 If the If the button is pressed, MP3 encoding begins. button is pressed again, Notice : Do not disconnect the Line cable during Encoding. If the battery is not charged enough, encoding will not be done. Adjust the volume of the external audio source to a suitable level and encode it. button is pressed, encoding is paused and if the the encoding resumes. If the volume level is extremely high, the sound quality may not be good. 34 35 Searching for Music/Voice Files ENG Note : VBR(Variable Bit Rate) file: MP3 file To search for specific parts during play : A desired part can be searched for by pressing and To change tracks during play: If the If the To change tracks when stopped: If the whose compression rate changes when played. With VBR files, pressing the holding down the , buttons during play. button is pressed during play, the next track is played. button is pressed before five seconds have passed since starting to play a track, the previous track is played and if the is pressed after five seconds, the current track is replayed from the beginning. NOR NOR , buttons are pressed when stopped, the yepp moves to the previous or next track, respectively. button within 5 seconds. From the start of the track may not result in the previous track playing. This player may not play back NOR NOR 00:01:30 001 Get Original, Black Eyed MPEG1 LAYER1 files. NOR NOR 00:01:12 P 001 23% NOR NOR 00:23:43 75% P 001 00:01:30 002 NOR NOR STOP 002 End of the World, Cold End of the World, Cold NOR NOR 00:01:12 001 NOR NOR 00:23:43 001 NOR NOR 00:00:01 NOR 001 NOR 00:00:01 NOR 003 NOR STOP 001 NOR NOR STOP 003 Get Original, Black Eyed Get Original, Black Eyed Girl Inside, Blues Traveler Get Original, Black Eyed Girl Inside, Blues Traveler Get Original, Black Eyed 36 37 Listening to FM Radio While the player is stopped, select FM Mode by using the button. Manual Search for a Frequency Press the Automatic Search for a Frequency Press and hold the Searching Stored Frequencies , buttons to search manually for the desired frequency. , buttons in order to search for and stop at frequencies for which there is reception. FM FREQ. 1 MHz 1 2 Press and hold the button in FM mode. , buttons to move to Press the button after using the the desired channel. Manual Storage of a Frequency After searching manually for a desired frequency, Automatic Storage of a Frequency Press and hold the FM FREQ. 89. 1 MHz Ch Change FM CH2 87. 5 MHz Ch Change FM CH3 87. 5 MHz press the button to select the channel in which to save the frequency. When the CH channel flashes, press the button to save the selected frequency. FM SET CH 02 99. Frequencies within the range of 87. 5MHz to 108MHz are automatically selected and stored. Frequencies are automatically stored, starting from 1. Note : You can store up to 20 frequencies. You can replace an existing frequency with a new one but you cannot delete a stored frequency. Note : To exit from FM Mode, press the button. FM AUTO Scan 89. 1 MHz 38 39 ENG Encoding From FM Radio Loop Repeating Starting Point Ending Point Press the button briefly again to set the end of the loop. ENG 001 1 2 Press the button during FM reception. Encoding of the currently transmitted FM broadcast begins. Press the button again. FMENC ENC 00 : 00 : 50 64K FM000001. MP3 While playing music files, press the button briefly at the beginning of the loop you want to set. appears in the display. A file is created and the encoding stops. Files are saved in order of F000001, F000002. . . and stop automatically when the memory is full. FM FREQ. 1 MHz NOR 00:01:30 001 NOR 00:02:30 Get Original, Black Eyed Get Original, Black Eyed Note : During encoding, there is no beeping sound and the button lights and back light do not illuminate. [. . . ] Set the desired device to earphone, headphone, EAR DEFAULT VOLUNE Use the , buttons to set the DEFAULT VOLUME. OPTIMIZATION EAR PHONE HEAD PHONE SPEAKER CAR PACK EXIT It is possible to set the default volume to a value DEFAULT DEFAULT VOL 17 speaker or carpack by using the , buttons. between 0 and 40. If the power is turned on again after having adjusted the volume above the default value, music is played at the default volume. If the power is turned on again after the volume was set to within the default value, the music is replayed at the previously played volume. 52 53 ENG Select SOUND CONTROL in the MENU. TIME CONTROL Select TIME CONTROL in the Menu. Setting the FM Frequency Unit ENG EXIT You can set the unit of frequency movement in FM mode. INTRO TIME Use the , buttons to set the INTRO TIME. INTRO SCAN The intro play time can be set from 10 to 50 seconds. INTRO TIME 10sec The first section of each track is played for the set time. 1 2 Select FM STEP in the MENU. Use the , buttons to move FM step to 100KHz or 50KHz button to select. POWER OFF TIME Use the and press the , buttons to set the POWER OFF TIME. The power off time can be set from 3 to 180 seconds. POW OFF TIME 05sec EREQ After stopping playback, the power is turned off automatically if no buttons have been pressed during the set time. SETTING DISPLAY SOUND CONTROL TIME CONTROL FM STEP EXIT 100KHz FM STEP FREQ 100KHz 50KHz UNIT UNIT When set to No Power Off, the power does not turn off even when the device is stopped. SLEEP TIME Use the , buttons to set the SLEEP TIME. SLEEP TIME zz The sleep time can be set from 3 to 180 minutes. z SLEEP TIME 15min The power turns off automatically after the set time has passed. Note : When the device is turned off automatically, the power can be turned on again by pushing the power switch down to the Off position and then pushing it back up to the On position. 54 55 MENU Table MENU PLAY MODE EQUALIZER NORMAL NORMAL CLASSIC REPEAT ONE JAZZ EXIT ROCK REPEAT ALL NORMAL DBB SHUFFLE CLASSIC DBB JAZZ DBB INTRO ROCK DBB OPTIMIZATION EXIT USER BASS ENCODE BITRATE BEEP ON/OFF TREBLE EXIT DEFAULT VOLUME EXIT EXIT EXIT FORMAT CONFIRM CANCEL SOUND CONTROL WOW LEVEL SRS TRUBASS EXIT . . . FOLDER PLAY FOLDERS FILE SETTING DISPLAY EXIT INFORMATION BACK LIGHT CONTRAST SCROLL SPEED LANGUAGE EXIT DELETE YES NO TIME CONTROL INTRO TIME POWER OFF TIME Use the or button to move and then select using the button. EXIT SLEEP TIME EXIT 56 57 ENG Troubleshooting The software doesn't work Refer to the recommended PC specifications. The buttons do not work. Check setting of Hold switch. yepp does not work and the LCD displays nothing. Check the battery capacity Check to see if the battery is inserted to the right poles , yepp keeps being turned off. In Stop mode, the power is automatically turned off after ten seconds (changes depending on settings). Check to see if there are files saved in it. In PLAY mode, music is not played after pressing the Verify that the device is currently set to Music mode. Check to see if MP3 or WMA files are saved in the built-in memory. [. . . ]