User manual SAMSUNG YP-N30S

[. . . ] Release the button to resume playback. Note Press and hold the REW ( ) button while a song is being played back to move quickly backward. Playback Press the controller. Note button on the yepp player or the remote To pause playback, press the button the mark blinks on the remote controller display panel. Press the button again to resume playback. Every buttons enable the lamp on the panel to blink for 3 seconds. To skip to the next song while another song is being played back Press the FF button to move one track forward. Control Volume Control volume with the volume control button (-/+) on your yepp player or remote controller. Note Volume can be controlled from 00 to 20. Press shortly to move up or down by 1 step. [. . . ] - The saving location letters (a, b, c, d, e) blink each time the AB button is pressed. - Once a radio station is saved, you can move directly to the saved location by clicking on the AB button. Note - Max. five stations (a, b, c, d, e) can be saved. - You can replace one station with another at each saving location. But it is not possible to delete a saved station. - Press the Stop button for a moment to turn off the system. 3 To search manully in one step increments, press and release either REW or FF. Note - In the FM mode, the LCD panel backlight is not turned on. - In the FM mode, the screen display does not appear in the main system. - Once the power is turned off, initialization will be made at MP3 mode. To set to FM mode, press the MODE button again. - When in the FM mode, do not attempt Format, Delete or Download. 7 English Listening to FM Radio Connecting yepp' to PC or MAC Minimum PC System Requirements Pentium 133 MHz Windows 98/2000 20 MB Free Disk Space CD-ROM Drive (Optimum:8 X and more) Built-in USB Port 1 Connect the USB cable to the USB port of the computer. 2 Turn the player on and connect the other end of the cable to the download connector. Note - Be sure to install the yepp' Explorer before connecting your yepp' to PC or MAC. When the message "Add new hardware wizard" appears on the screen, click [Cancel] and then install the yepp' Explorer. Follow the on-screen instructions for RealJukebox. Sending files to yepp' (continued. . . ) Before sending files to your yepp', connect the yepp' to PC and execute the RealJukebox. yepp' Explorer 1 Execute the yepp' Explorer. - Double-click the icon of the yepp' Explorer on the desktop. MAC Check the Explorer is accessed. Access is allowed only when Explorer is selected. If Explorer is not selected, select Explorer and click on the OK button. 2 Turn on the yepp' by pressing . 3 Click the Refresh icon on the yepp' Explorer. 4 Click [Copy to] and [Flash Memory] or [SmartMedia Card]. 5 Select the file you would like to send to your yepp'. 6 Click [Open]. - The selected file has been saved. Now you can listen to music with yepp' after removing the parallel cable. Note Uploading Voice Click [File], [Copy to] and select [PC]. When a voice file is transmitted to another person by E-mail, receiver should install the mi-sc4. acm file atc://windows//system to execute the file. The mi-sc4. acm file can be downloaded from www. samsungyepp. com. Note If yepp Explorer is installed in your PC, mi-sc4. acm will automatically be installed in c://windows//system. - The yepp' uses around 1MB of memory for each minute of music. - Execute file transfer in the MP3 mode only. If it is executed in FM mode, errors may take place. 12 RealJukebox 1 Execute RealJukebox. - Double-click the RealJukebox icon on the desktop. MAC 1 Execute the yepp' Explorer. - Double-click the yepp´ TM Explorer icon in the HDD. 2 Turn on the yepp' by pressing . [. . . ] 3 Click [Edit] and select [Delete]. - You can also delete the file by pressing the right button on the mouse and selecting Delete. 1 Press the PUSH OPEN button to open the SmartMedia Card Slot. MAC 1 Click the file you would like to delete. 2 Click [File] and select [Delete]. 2 Insert the SmartMedia Card into the card slot of your player. Verify that the SmartMedia Card mark is displayed on your panel. - To send files to the SmartMedia Card, you must format the card before using it. 3 Push down the EJECT button ( ) in the direction of the arrow to take out the SmartMedia Card from the slot. [. . . ]