User manual SAMSUNG YP-Q2JEW

[. . . ] Press and hold to move continuously. If the REW button ( ) is pressed before the first 5 seconds of each track, the previous song will be repeated. If the REW button ( ) is pressed after the first 5 seconds of each track, the current song will be repeated. Stop Music Press the Stop button ( running. ) on the yepp to stop sounds 3 English Listening to music through yepp Searching the MP3 files Changing the Time and Date To check the Time and Date 1 The time appears when battery is in. 2 If there isn't any button pressed in the MP3 mode for one minute, the system converts to clock mode. Setting the Modes Each time the button is pressed long, the modes will be changed in the order of Repeat, EQ, Hold and Erase. Repeat mode Press the button long on the MP3 mode to change to setup mode. [. . . ] REPEAT ALL mode : Enables to repeat all the track. SHUFFLE mode : Enables to playback at random. INTRO mode : Enables to repeat initial parts of the tracks stored. x NORMAL mode : Enables to repeat. 3 When the 4 Press the Note button is pressed shortly in the MP3 mode, the system converts to clock mode. / button shortly in the clock mode, then the date appears for a short time. While you are replacing batteries, the time set is stored. To change the Time and Date 1 Press the button in the clock mode, the mode will be transferred to the Date, Time Setup. / buttons move to Setup button ( Note · When you set DATE - The year blinks first. Adjust it with the / buttons, then you can set the year with button. · When you set TIME - The AM/PM selection blinks first. Adjust it with the / buttons, then you can set the time with button. 2 Firstly, the Date will be shown. Using the ). Equalizer mode Press the button long on the MP3 mode to change to setup mode. Press the / button to select the EQ, then press the button. 2 Execute the yepp explorer. - Double-click the yepp explorer icon. 1 Execute the yepp explorer. - Double-click the icon of the Baby yepp Explorer on the desktop. 2 3 4 5 Click the Refresh icon ( ) on the yepp explorer. Click [Copy to] and [Flash Memory]. Select the files you would like to send to your yepp. Now you can listen to the music with your yepp after removing the USB cable. The yepp uses around 1MB of memory for each minute of music. 3 4 5 6 Click [File] and [Refresh] on the yepp explorer. Select the file you would like to send to your yepp. Now you can listen to music with yepp after removing the USB cable. Note Deleting files 1 Click the file you would like to delete. 2 Click [File] and [Delete]. Note You can also delete the files by pressing the right button on the mouse and selecting [Delete]. (PC) 8 You must install RealJukebox on your computer before making MP3 files. 1 Execute the RealJukebox. - Double-click the icon of the RealJukebox on the desktop. 3 Insert an audio CD into the CD-ROM drive. - The CD information is displayed. 2 Set up environment for making MP3 files from an audio CD. 3) Select [MP3 Audio] in [Select a Format]. 4) Click [Secure my. . . ] in [Secure Files] to erase the check-mark () (to make [Secure my. . . ] unchecked). 5) Select [I accept. . . ] in the POP-UP Window. 6) Click [OK] on the two successive windows. 4 Select the track you would like to convert into an MP3 file. 5 Click [Controls] and [Record Ctrl+R]. [. . . ] If this happens, wipe the player with a dry cloth. x Avoid to keep the yepp in the high humidity, temperature and strong magnetic area. x Do not use thinner, alcohol, or benzene when you clean the your yepp. It may damage it. Troubleshooting The software does not work. - Refer to pages 5~6. The message "BAD SONG" appears. - This message appears when the file does not meet the MP3 format. The player does not work or nothing is displayed on the LCD. - Check the capacity of the battery. [. . . ]