User manual SAMSUNG YP-T5V

[. . . ] Please check the yepp home page for upgrades. 6 7 Accessories 12-Hour Continuous Play This unit uses one AAA/LR03 alkaline battery. Actual playing time may vary according to the type and capacity of the battery. Player Carrying case Earphones USB cable User manual Voice Recording Function You can do a Voice Recording with high quality and use it for a conference. One Battery (1. 5V AAA/LR03 type) Neck Strap Direct Connect USB Adaptor Line In Cable Installation CD Sound Model Built-in memory YP-T5 H 128MB YP-T5 V 256MB YP-T5 X 512MB You can adjust the equalizer manually. The capacity of the useable built-in memory is less than indicated as the internal firmware uses a part of the memory as well. Design of accessories is subject to change, for the purposes of improvement, without notice. 8 9 Location of Controls (yepp) Display Neck strap Hook Display MENU, Navigation button/ Move to Track/Speed Search/ Volume Button Play/Stop/Pause indicator Equalizer, SRS indicator Bit rate indicator Play mode indicator Track Number indicator NOR 192 NOR 001/020 00:01:30 Singer-Song 1 Remaining Battery Power indicator Playtime indicator Title (track & artist) indicator Mode indicator Loop Repeating Button Play/Pause Button Recording Button Microphone Hold Switch Inserting a Battery 1 ENC Jack USB Cable Connection Port Battery Cover Earphone Jack Slide the cover in the direction of the arrow to open. Insert a battery to the right poles + , ­ and push-close the cover in the direction the arrow as indicated. 2 Note Do not place heavy objects on the cover. 10 11 Connecting the yepp to a PC System Requirements. The PC system must meet the following specifications: Pentium 133MHz or greater. [. . . ] Press and hold to increase or decrease the volume in greater increments. Pausing Music Press the button to pause playback. NOR 192 NOR HOLD Function 001/020 00:01:30 Singer-Song 1 If no buttons are pressed within 10 seconds GOOD BYE In Hold mode, all buttons are disabled. Release the key to resume play normally. Manual Search for a Frequency Automatic Search for a Frequency Pull the , keys briefly to search manually for the frequency you want. FM MO Pull and hold the , keys to search for and stop at frequencies with reception. FM MO To change tracks during play FREE CH 88. 00 MHz SEARCHING 89. 10 MHz Pull the key briefly during playback to play the next track. Pull the key briefly within 5 seconds after playback starts to move to and play the previous track. Pull the key briefly after five seconds to play the current track from the beginning. Manual Storage of a Frequency After searching manually for the frequency you want, press and hold the key to display the Save screen. Use the , keys to select the number you want to assign to save the frequency and then press the key. FM MO Automatic Storage of a Frequency Press and hold the AB button while in FM Mode. Frequencies within the range of 87. 50MHz to 108. 00MHz are automatically selected and stored. Frequencies are automatically stored, starting from 1. FM SET To change tracks when stopped Pull the , keys to the left or right in stop mode to move to the previous/next track. Note VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file. SAVE?1 89. 10 MHz In the case of a VBR file, you cannot move to and play the previous track even if you push the key within 5 seconds after playback starts. Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play. 1 AUTO PRESET 89. 10 MHz Note To exit from FM Mode press the key. Number of channels saved. 30 Mono (MO) or Stereo (ST) is automatically selected. 31 Listening to FM Radio Searching Stored Frequencies FM Encoding 1 2 1 Press the REC button during FM reception. Press the button in FM Mode. Encoding of the currently transmitted FM broadcast begins. 001/001 00:01:30 PRESET screen will appear. Use the , keys to move to the frequency you want. F001. MP3 FM MO FM MO PRESET 1 89. 10 MHz FM MO PRESET 2 91. 90 MHz PRESET 3 107. 70 MHz 2 Deleting Stored Frequencies - After moving to the PRESET number you want to delete, press and hold the Press the REC button again. A file is created and the encoding stops. Files are saved in order of F001, F002, F003. . . and stop automatically when the memory is full. key. The saved PRESET number will be deleted. FM MO PRESET 1 89. 10 MHz FM MO PRESET 1 89. 10 MHz Deleted!! Note You can store up to 20 frequencies. Press the button in the PRESET screen to exit the PRESET mode. 32 33 Loop Repeating Starting Point While playing music files, press the AB button briefly at the beginning of the loop you want to set. A appears in the display. Using Navigation Ending Point Press the AB button briefly again to set the end of the loop. You can easily search for files or switch modes using the Navigation function. 1 Press and hold the button to move to Navigation mode. ROOT MUSIC/ ROOT Singer - Song 1 Singer - Song 1 Singer - Song 2 When the folder is in play or stop status. NOR 192 NOR When the file is in play or stop status. 001/020 00:02:05 Singer - Song 1 NOR 192 NOR 001/020 00:02:50 Singer - Song 1 2 3 Select the file or folder that you want to play. : When moving to a higher-level folder. , : When moving to a lower-level folder. : When moving to a file or folder in the same directory. When there is not a lower folder, the selected file will be designated as part of the playlist. Note Press the button. Press the AB button briefly to cancel the loop. Loop Repeat is automatically released if you Speed Search with the The selected file will be played. If you select a folder, all the files in the selected folder will be played. , buttons. Note Press and hold the key in Navigation mode to exit Navigation mode. 34 35 Setting Playlist Setting Playlist - Move to the file you want in Navigation mode and press the Setting up MENU Press the Use the key. , key to switch to MENU mode. key to move and press the key briefly to select the menu you want. key to exit the MENU mode. Press and hold the The selected file will be marked. To release the playlist setting, move to the marked file in Navigation mode and press the key again. ROOT Singer - Song 1 Singer - Song 2 ROOT FM Radio File Fm Radio File Now playing FM Radio File Settings Now playing Singer - Song 1 Singer - Song 2 Now playing Playing Playlist 1 2 Press and hold the AB button in Music mode. The Playlist you set will be displayed. Move to the file you want to play and press the button. Now playing : To check the track currently played. Settings : To set the detailed function of yepp. The selected file will be played. Singer - Song 1 Singer - Song 2 NOR 192 NOR ¢¾ 001/020 00:01:30 Singer - Song 1 Note In MENU mode, no input for 15 seconds will cancel the MENU mode. Note 36 Select PLAYLIST in File Delete (see "Deleting") to release all the playlists you set. 37 Managing Files Deleting Formatting 1 2 3 Select File in the MENU. (refer to "Setting up MENU") 1 2 key and DELETE Singer - Song 3 Select File in the MENU. (refer to "Setting up MENU") In File, select File Delete and the mode the target file is in. Select Format in File. Formatting is performed if CONFIRM is selected. Use the , key to move to the file you want to delete, press the select CONFIRM. [. . . ] 51 50 Troubleshooting The software doesn't work The buttons do not work. Refer to the recommended PC specifications. Check setting of Hold switch. Remove the battery once and then insert it again. yepp does not work and the LCD displays nothing. Check the battery capacity Check to see if the battery is inserted to the right poles ( + , ­ ) The yepp keeps being turned off. In Stop mode, the power is automatically turned off after ten seconds (changes depending on settings). Check to see if there are files saved in it. In PLAY mode, music is not played after pressing the Check to see if MP3 or WMA files are saved in the built-in memory. Check to see if the HOLD button is locked. button Something's wrong with play time displayed during Play mode. "VBR SONG" message is displayed while VBR (Variable Bit Rate) file is playing. Files cannot be downloaded. Check to see if the driver is installed correctly in the computer. LCD window is dark Check the connection between yepp and computer. [. . . ]