User manual SAMSUNG YP-U2J

[. . . ] YP-U2J For Your Safety WARNING Product Use Read this manual carefully to ensure proper use of the product and to avoid any danger or physical damage. Failing to heed the product instructions may cause serious injury. Improper use can result in explosion, fire or electric shock. Do not disassemble, repair or modify this product on your own. To avoid hearing damage Using the earphone or headphone for an extended time can cause serious damage to your hearing. If you are exposed to sound louder than 85db for an extended time, you may adversely affect your hearing. The louder the sound is, the more seriously damaged your hearing may be (an ordinary conversation is 50 to 60 db and the noise level on a busy road is approximately 80 db). You are strongly advised to set the volume level to medium (the medium level is usually less than 2/3 of the maximum). Do not get the product wet or drop it in water. If the product gets wet, do not switch it on. Contact a Service Center. If you feel a ringing in the ear(s), lower the volume or stop using the earphone or headphone. Do not place the product in damp, dusty or sooty areas, as it could result in fire or electric shock. [. . . ] - Japan:Search for FM frequencies in 100 kHz increments between 76. 0 MHz~108. 0 MHz. - Other Countries:Search for FM frequencies in 50 kHz increments between 87. 5 MHz~108. 0 MHz. If you change the FM region, the previously stored radio frequencies are removed. I 40 To set FM sensitivity and hold 1 Press screen. the [ menu ] button to move to the Chapter 3. Listening to Music/FM Radio Setting FM Radio [ + , ] button 2 Press thepress- the [ ] to select <Settings> and then button. I The Settings menu appears. [ + , ] button 3 Press thepress- the [ ] to select <FM Radio> and then button. I The FM Radio menu appears. [ + , ] button 4 Press thepress- the [ ] to select <FM Search Level> and then button. I The FM Search Level menu appears. [ + , ] button 5 Press thepress- the [ ] to select the search level and then button. I I You can select from <High> <Middle> and <Low>. The higher FM search level is, the more frequencies can be received. 41 Recording Voice Recording 1 Press and hold the [ I USER/ ] button. Voice recording will start as soon as the file name is displayed 2 Press the [ recording. I USER/ ] button again to end After the confirmation message of recording completion appears, the recording is automatically stored in <VOICE> folder. File names during recording Recording files are specified as "VNNN. WAV" during recording. V means it is a voice-recording file, NNN defines the recording number, and WAV is the file format. For example, file name V003. WAV is the third voice-recording file to be saved. I To listen to saved recording files, use the Navigation (Search) function. Do not place the microphone too close or too far away during recording, as this can affect the recording quality. Voice recording does not perform properly when the battery is low. NOTE I I CAUTION I 42 Chapter 4. Settings Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Setting Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Setting Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Setting the Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Setting Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Setting the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Settings Setting Music You can set detailed settings for music playback. and hold 1 Press screen. the [ menu ] button to move to the the + , 2 Presspress[ the-[] button to select <Settings> and then ] button. I The Settings menu appears. the + , 3 Presspress[ the-[] button to select <Music> and then ] button. I The Music menu appears. 4 Use the [ + , - ] and [ functions. ] buttons to set necessary I NOTE Button functions to use during setting. - Press the [loeoe] button to move to the previous item. - Press the [l] button to move to the next item. - Press the [+, -] button to move up or down through the current menu. - Press the [ ] button to select or save the menu. If there is no button operation for about 30 seconds in the Settings screen, settings will be canceled and you will be returned to the previous mode. I 44 I DNSe : You can select a suitable sound for each music genre. Select either <3D-User> <3D-Studio> <3D-Stage> <3D-Club> <Normal> <Rock> <House> <Jazz> <Dance> <Ballad> <R&B> <Classical> or <User EQ>. 3D User Set : Sets 3D sound effect and bass enhancement. 3D can be set between 00~05 levels, and Bass Enhance between 00~03 levels. To use 3D User Set, select <3D User> from <DNSe>. User EQ Set : Directly select a sound effect (EQ). [. . . ] Restart your PC and reconnect the player. Check the battery. The backlight does not turn on. The product is hot. I I Heat may be generated during recharging. This has no effect on the product life or functions. 56 Chapter 6. [. . . ]