User manual SANGEAN DT-400W

[. . . ] To return product for warranty repair: 1. Remove the batteries (if applicable) and carefully pack the unit along with all it's accessories in a suitable well padded corrugated box. Enclose copy of proof of purchase with date and a letter describing your specific problem. Enclose your check or money order payable to Sangean America, Inc. [. . . ] Place 2 `AA' batteries inside the unit oriented to the illustration located just below the battery compartment. NOTE: A flashing "E" appearing on the LCD display indicates a weak battery and that replacement of batteries is required. And the Weather Alert will be deactivated. Tuning the Radio Seek Tuning Turn radio on using the On/Off button located on the top of the radio. Select desired band by pressing the "Band" selector on the front of the unit. Press and hold the proper tuning button (Up/Down) for approximately ½ second. Radio will seek for next active signal station. Repeat as many times as desired. 9 Manual Step Tuning Turn radio on using the On/Off button located on the top of the radio. Select desired band by pressing the "Band" selector on the front of the unit. Press the desired tuning button (Up/Down) repeatedly until desired frequency is found. Memory Tuning To tune in stations already programmed into memory. See Setting Memory Section for instructions on how to program stations into radio memory. Turn radio on using the On/Off button located on the top of the radio. Press "My Favorites" button located on the right side of the radio. "MY" should appear on the right hand of the display indicating function is on. Use tuning controls (Up/Down) to navigate through memory programmed stations. Press "My Favorites" button to turn off memory tuning. 10 Setting Memory Turn radio on using the On/Off button located on the top of the radio. Select desired band by pressing the "Band" selector on the front of the unit. Tune to desired station using either Manual Step Tuning or Scan Tuning options. Press Memory Button located on the front of radio unit and use the tuning controls (Up/Down) to reach memory position as indicated in the top-right of the display. Press Memory Button located on the front of the unit to lock station into memory. * There are 19 memory sets. Weather Band and weather alert operation 1. When that radio is on, press the WX button to switch between AM/FM and Weather Band. [. . . ] Once time displayed matches desired setting press MEMO or CLOCK button once more. Time should display solidly, with the colon blinking periodically. 13 Change AM (MW) band tuning step In Europe and other parts of the world, AM (MW) tuning step are 9 kHz, in America the AM tuning step is 10 kHz. To change the AM tuning step from 10 kHz to 9 kHz, proceed as follows: 1. Press Tuning Down button and hold meanwhile press the Power button and hold. [. . . ]