User manual SANUS SYSTEMS BFAV550

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SANUS SYSTEMS BFAV550. We hope that this SANUS SYSTEMS BFAV550 user guide will be useful to you.

Lastmanuals help download the user guide SANUS SYSTEMS BFAV550.

Download

You may also download the following manuals related to this product:

SANUS SYSTEMS BFAV550 CUT SHEET (238 ko)

Manual abstract: user guide SANUS SYSTEMS BFAV550

Detailed instructions for use are in the User's Guide.

 [. . . ] Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified by Sanus Systems. Sanus Systems can not be liable for damage or injury caused by incorrect mounting,  incorrect assembly,  or incorrect use.  [. . . ] Please call Sanus Systems before returning products to the point of purchase. Required Tools: Phillips screw driver,  drill,  1/4 inch drill bit Supplied Parts and Hardware: Some parts not shown as actual size*

(3) T - Nuts - b (1) Mount Assembly - a

(3) 10-24 x 5/8 Bolt - c

(4) M4 x 10 mm Bolt - d

(4) M4 x 20 mm Bolt - e (4) . 5 inch Spacer - f

(4) Cable Tie - g

(1) Allen Key - h

Sanus Systems 2221 Hwy 36 West,  Saint Paul,  MN 55113 1. 3. 05 Customer Service: 800. 359. 5520. See complementary Sanus products at www. sanus. com

Step 1: Remove Cover Using a Phillips screw driver loosen the two flat head bolts from the cover and slide it down and away from the mounting plate. You will re-install the cover once cable management is complete. 

Diagram 1

a

mounting plate cover flat head bolts

Step 2: Prepare Mounting Surface Use the base of the Mount Assembly (a) as a template to mark three holes in the cabinet in the desired location. Drill three 1/4 inch holes at the marked locations. See the dimensional drawing on the right for assistance. See page 9 for a 1:1 scaled version of the dimensional drawing. 

Dimensional Drawing

3. 28

1. 89

1. 89

Step 3: Secure Mount Assembly to cabinet Using the 10-24 x 5/8 Bolts (c) and the T - Nuts (b) secure the Mount Assembly to the cabinet. Note: Make sure the spikes on the T - Nuts is facing toward the cabinet. Diagram 7 Detailed View

cable cover

screw

Step 8: Cable Management (±35° swivel) If ±110° swivel is desired,  skip to Step 9. If ±35° swivel is desired,  Step 8 will be the final step. Swivel the Mount Assembly (a) 35° either left or right. You will run the cables in the opposite direction. You can attach the Cable Ties (g) in locations marked in Diagram 8 below. Re-install the cable cover and the base cover in the same manner they were removed. Diagram 8

a cable path cable tie holder

Step 9: Remove Degree Stop Using provided Allen Wrench (h),  remove the 35 degree stop. Diagram 9

35 degree stop

Step 10: Cable management (±110°) Swivel the Mount Assembly (a) 110° either left or right.  [. . . ] Diagram 8

a cable path cable tie holder

Step 9: Remove Degree Stop Using provided Allen Wrench (h),  remove the 35 degree stop. Diagram 9

35 degree stop

Step 10: Cable management (±110°) Swivel the Mount Assembly (a) 110° either left or right. You will run the cables in the opposite direction.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SANUS SYSTEMS BFAV550

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SANUS SYSTEMS BFAV550 will begin.