User manual SANUS EURO FURNITURE GLASS AV STANDS-EFAV-IIG

[. . . ] Assembly Instructions for Model: EFAV-IIg Thank you for choosing the Sanus Systems Model EFAV-IIg. [. . . ] See complementary Sanus products at www. sanus. com Step 1 - Attach Floor Glides to Metal Frame Thread the five Floor Glides (I) into the Metal Base (D). Diagram 1 I D I I I I Step 2 - Attach 3" Cope Tubes to Metal Base Place a Pan Head Bolt (G) through each of the four holes in the Metal Base (D); then, thread them into the four 3 Cope Tubes (B). Do not tighten the Pan Head Bolts (G) until the entire EFAV-IIg is assembled. Place a Tube Spacer (K) on each 3" Cope Tube (B) with the small lip facing up (See Detail A). Diagram 2 K Small Lip B Detail A K G B G D G Step 3 - Place a Video Shelf on the Metal Base Align four holes in a Video Shelf (E) with the small lip of the Tube spacers (K) placed on the 3" Cope Tubes (B) in Step 2 (See Detail B); then, place the Video Shelf onto the 3" Cope Tubes. Diagram 3 E Small Lip must fit into hole of Video Shelf Detail B K B K B Step 4 - Secure the Angled Center Support to the Video Shelf NOTE: Make sure the coped end of the Angled Center Support (C) fits over the Metal Base (D). Attach the Angled Center support (C) to the bottom of the Video Shelf (E) by threading a Pan Head Bolt (G) up through the Angled Center Support, the Video Shelf (E); then, place a Tube Spacer (I) --with the small lip facing out-- on each end a 8" Pillar (A), and thread the Pan Head Bolt into the 8" Pillar. K A K E C D G Step 5 - Attach 8" Pillars Screw a Shelf Connector (H) into each of the 3" Cope Tubes (B); then, place a Tube Spacer (K) --with the small lip facing out-- onto each end of four 8" Pillars (A). [. . . ] See complementary Sanus products at www. sanus. com [. . . ]