User manual SANUS VISIONMOUNT FLAT PANEL WALL MOUNT-VMPL2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SANUS VISIONMOUNT FLAT PANEL WALL MOUNT-VMPL2. We hope that this SANUS VISIONMOUNT FLAT PANEL WALL MOUNT-VMPL2 user guide will be useful to you.
Lastmanuals help download the user guide SANUS VISIONMOUNT FLAT PANEL WALL MOUNT-VMPL2.
Manual abstract: user guide SANUS VISIONMOUNT FLAT PANEL WALL MOUNT-VMPL2
Detailed instructions for use are in the User's Guide.
[. . . ] Sanus makes every effort to assure all necessary television mounting hardware is included. If the hardware you need is not included please consult your local hardware store or call Sanus Systems. Required Tools: 3/16 drill bit, 1/2" Masonry Bit for brick concrete or concrete block installations, wrench or socket set, Phillips screw driver. [. . . ] if you feel resistance , remove the bolt immediately!If you are unable to find appropriate hardware for your television, consult a local hardware store or call Sanus Systems. Locate the threaded inserts on the back of your flat panel television and determine which of the provided Bolts is the correct diameter. To test each diameter, thread the Bolts carefully into your television by hand until you find the diameter that correctly fits. Next, determine the correct length of the required Bolt. Televisions with a flat back will require one of the shorter Bolts without a spacer. Some televisions have a curved back or have recessed threaded inserts. This may require a longer Bolt along with a Spacer placed between the television and the Monitor Bracket. Once you have the correct bolt picked out, you can follow the diagrams below to see what additional hardware you will need to mount the Monitor Brackets (c) to your television. For a television with a flat back, see Step 3 for installation instructions. For a television with a curved back see Step 4. For a television that has a back with recessed threaded inserts see Step 5. Step 3: Attaching the Monitor Brackets to a TV with a flat back WARNING: DO NOT LAY THE TELEVISION FACE DOWN ON THE GLASS, lean it up against a wall or other solid surface!Laying the television down on the glass may cause permanent damage. The Monitor Brackets (c) should be placed as vertically close to center of the television as possible before installation. For a flat back TV that requires the M4 or M5 diameter Bolt, thread a M4 x 12 (e) or a M5 x 12 (g) Bolt through the appropriate Lock Washer (m, n), an M4/ M5 Washer (t), the Monitor Bracket and finally into the TV. [. . . ] Proceed to tighten the Bolts firmly with a phillips screw driver. Step 6: Choose mounting position: You can mount your television in either of two positions: flat or at a 5 degree downward tilt. To mount the television flat to the wall use only the Monitor Brackets (c). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANUS VISIONMOUNT FLAT PANEL WALL MOUNT-VMPL2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SANUS VISIONMOUNT FLAT PANEL WALL MOUNT-VMPL2 will begin.
