User manual SANUS VISIONMOUNT LCD DESK MOUNT-SD103
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SANUS VISIONMOUNT LCD DESK MOUNT-SD103. We hope that this SANUS VISIONMOUNT LCD DESK MOUNT-SD103 user guide will be useful to you.
Lastmanuals help download the user guide SANUS VISIONMOUNT LCD DESK MOUNT-SD103.
Manual abstract: user guide SANUS VISIONMOUNT LCD DESK MOUNT-SD103
Detailed instructions for use are in the User's Guide.
[. . . ] Do not use this product for any purpose that is not explicitly specified by Sanus Systems. If you do not understand these directions, or have any doubts about the safety of the installation, please contact Sanus at +31 -(0)40 26 68 619 or www. Our customer service representatives can quickly assist you with installation questions, and missing or damaged parts. [. . . ] Slide the two pieces of the stem apart until the upper holes on the outside stem align with the holes on the inner stem. Place the screws through the holes and tighten them with the Allen Key. Step 2: Attach the Pillar to the Desk To attach the Pillar [A] to the edge of the desk as shown in Figure 2a, place the Pillar in the desired location. check that the pad is resting flat on the finished surface of the desk. Secure the pillar by tightening the clamp until the base rests firmly against the bottom of the desk. To attach the Pillar through a wire management hole as shown in Figure 2b, you must first separate the inner and outer stems on the Pillar. Loosen and remove the two screws on the stem with the Allen Key [D] as shown in Figure 1 above, and slide the stems apart. Place the Pillar through the wire management hole, resting the pad flat on the finished surface of the desk. Reattach the outer stem with the two screws and the Allen Key. Then secure the pillar by tightening the clamp until the base rests firmly against the bottom of the desk. Step 3: Attach the Monitor Mount to a Monitor with a Flat Back NOTE: For monitors with curved backs or obstructions, go to Step 4. Attach the Monitor Mount [B] to the back of your LCD monitor using the M4 x 10 mm Screws [E], as shown in Figure 3. Position the Monitor Mount so that the large side of the tapered hole faces the bottom of the monitor. Place the four screws through the Monitor Mount into the VESA bolt mounting pattern on the back of the monitor. [. . . ] However, CSAV makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANUS VISIONMOUNT LCD DESK MOUNT-SD103
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SANUS VISIONMOUNT LCD DESK MOUNT-SD103 will begin.
