User manual SANUS VISIONMOUNT LCD WALL MOUNT-VM2

[. . . ] This product is designed to mount VESA 75/100 compatible LCD televisions up to 30 pounds onto a vertical wall. It allows you to effortlessly tilt and swivel your new television up to 15° in either direction as well as extend it up to 9" away from the wall without the use of tools. [. . . ] Make sure the large side of the tapered hole on the Monitor Mount faces toward the bottom of the television. Step 2a - Attaching under a cabinet: Use the Wall Plate (c) as a template to mark the desired location of the two mounting holes under the cabinet. Pre-drill the two holes with a 5/16" drill bit. Tighten bolts with the Allen Key (b) until they are snug. Step 2b - Attaching to the Wall: Hardware for wood stud mounting is provided. It is a good idea to verify the stud location with an awl or thin nail as shown in Diagram 2. Use the Wall Plate (c) as a template to mark the two hole locations on the wall. Make sure these holes are aligned vertically and centered over the stud. Attach the Wall Plate to the wall using the two Lag Bolts (d) as shown in Diagram 2b. tighten the Lag Bolts firmly with the Allen Key (b). Step 3 - Add Monitor Mount to Wall Plate: Once the LCD TV is attached to the Monitor Mount (a), and the Wall Plate (c) is properly installed, set the tapered hole in the Monitor Mount down over the cone shaped bushing on the Wall plate. This process is shown without the TV in Diagram 3 so that you can see the parts more clearly. [. . . ] Assurez-vous que l'ouverture la plus large du trou conique du support d'écran est orientée vers le bas du téléviseur. Etape 3 - Ajout du support d'écran à la plaque murale : Une fois le téléviseur LCD fixé au support d'écran (a) et la plaque murale (c) correctement installée, placez le trou conique du support d'écran sur le raccord conique de la plaque murale. [. . . ]