User manual SANUS VISIONMOUNT PULL OUT CABINET MOUNT-VMPO1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SANUS VISIONMOUNT PULL OUT CABINET MOUNT-VMPO1. We hope that this SANUS VISIONMOUNT PULL OUT CABINET MOUNT-VMPO1 user guide will be useful to you.
Lastmanuals help download the user guide SANUS VISIONMOUNT PULL OUT CABINET MOUNT-VMPO1.
Manual abstract: user guide SANUS VISIONMOUNT PULL OUT CABINET MOUNT-VMPO1
Detailed instructions for use are in the User's Guide.
[. . . ] It can also be used with a VM200 for tilting LCDs or a VMPL50 for Plasmas. Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sanus at 800. 359. 5520 or www. sanus. com. Check carefully to make sure that there are no missing or defective parts. [. . . ] Repeat the process until all 3 Button Head Bolts are fastened securely on each Glide. Note: Make sure the end of the Glide with a Dowel is facing the front of the Shelf. Detailed View Diagram 2 a
k
mounting surface c b
Step 3: Reposition the Dowels (optional) To have the VMPO extend further, simply remove the Dowels by lifting them out of the Glides (k, l) and placing them in the front hole location as shown in Diagram 3. WARNING: Proceed with this step at your own risk!Note: Sanus Always recommends fastening the cabinet or armoire to the wall!If you choose to remove this Dowel, it is the responsibility of the installer to verify the mounting surface is capable of supporting the weight of the television in the fully extended position. Diagram 3 Dowel
k
l
front location
Step 4: Attach Top Assembly to Glides Orient the Base (j) so that the 4 small holes face the front and the side with the long grooves faces down. Then orient the Top Assembly (m) so that the vertical tube is closer to the back. Insert a Furniture Bolt (g) through the Top Assembly, the Base, and finally thread it into the Glide (k, l). See the Detailed View of Diagram 4 for assistance. Repeat process for each of the remaining 3 Furniture Bolts. Proceed to tighten each Furniture Bolt firmly with the Allen Key (i). Diagram 4 Detailed View
g
m
j
k
l
Step 5: Attach Handle and Front Cover Simply insert a Wood Screw (h) through the appropriate hole in the Front Cover (o), the U shaped slit in the Handle (n) and thread it into the appropriate hole in the front of the Base (j) as shown in the Detailed View of Diagram 5. Repeat process until all 4 Wood Screws are fastened to the Base. [. . . ] Step 9: Attach the VMPL50 Wall Plate to Top Assembly Insert a M8 Bolt (c) through the appropriate hole in the VMPL50 Wall Plate, the Top Assembly (m), the M8 Lock Washer (f), and thread it into a M8 Nut (d). Repeat the process for each remaining M8 Bolt. Proceed to tighten each M8 Nut with a wrench. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANUS VISIONMOUNT PULL OUT CABINET MOUNT-VMPO1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SANUS VISIONMOUNT PULL OUT CABINET MOUNT-VMPO1 will begin.
