User manual SANUS VISIONMOUNT UNDER CABINET MOUNT-VMUC1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SANUS VISIONMOUNT UNDER CABINET MOUNT-VMUC1. We hope that this SANUS VISIONMOUNT UNDER CABINET MOUNT-VMUC1 user guide will be useful to you.
Lastmanuals help download the user guide SANUS VISIONMOUNT UNDER CABINET MOUNT-VMUC1.
Manual abstract: user guide SANUS VISIONMOUNT UNDER CABINET MOUNT-VMUC1
Detailed instructions for use are in the User's Guide.
[. . . ] Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sanus at 800. Check carefully to make sure that there are no missing or defective parts. [. . . ] Required Tools: Phillips screw driver, drill, 1/4 inch drill bit Supplied Parts and Hardware: Some parts not shown as actual size* Using a Phillips screw driver loosen the two flat head bolts from the cover and slide it down and away from the mounting plate. You will re-install the cover once cable management is complete. Mounting plate cover flat head bolts Step 2: Prepare Mounting Surface Use the base of the Mount Assembly (a) as a template to mark three holes in the cabinet in the desired location. Step 4: Attach flat panel display to mounting plate Make sure no power is supplied to the display before mounting the display!Do not put your fingers or cables between movable parts. Once the Mount Assembly (a) is secured to the cabinet, align the appropriate slots in the mounting plate with the four mounting holes of your LCD display. Use either four M4 x 10 mm Bolts (d) or four M4 x 20 mm Bolts (e) with four . Diagram 4a below shows the M4 x 10 mm Bolts being used. Diagram 4b on the next page shows the M4 x 20 mm Bolts with the . 5 inch Spacers (f) should only be used if there is an obstruction or the hole pattern is physically recessed on the back of the LCD panel. Using a Phillips screw driver, slightly loosen the Bolts (d, e) that secure the LCD panel to the mounting plate. Step 6: Adjust tension of Mount Assembly The tension of the Mount Assembly (a) can be adjusted by simply tightening or loosening the tension bolt labeled in Diagram 6 with the provided Allen Key (h). [. . . ] Étape 3 : Fixation du support d'écran à l'armoire À l'aide des boulons 10-24 x 5/8 (c) et des écrous en T (b), fixez le support d'écran à l'armoire. Étape 6 : Réglage de la tension du support d'écran La tension du support d'écran (a) peut être ajustée en serrant ou en desserrant simplement le boulon de tension étiqueté au schéma 6 à l'aide de la clé Allen fournie (h). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANUS VISIONMOUNT UNDER CABINET MOUNT-VMUC1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SANUS VISIONMOUNT UNDER CABINET MOUNT-VMUC1 will begin.
