User manual SANYO AVM-1341S

[. . . ] Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. LOCATION Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen. Also, be sure that the location selected allows a free flow of air to and from the perforated back cover of the set. NOTES Never remove the back cover of the set. This can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer or service shop. VIEWING This color TV may be viewed from any desired distance. [. . . ] When you have finished "ID NO SETTING", press MENU button repeatedly until the menus disappear. NUMBER as you need it to select guarded channels. NUMBER, repeat the procedure. NOTES The selected channel is changed directly regardless of ANTENNA mode. At the video mode, CH GUIDE button does not operate. 18 19 SET-UP CH GUARD SETTING/CANCELLING 1. Press CH / buttons or number buttons to select the channel you wish to guard or cancel the guard. Press MENU button and move the cursor to "SET UP" option; press VOL + button then the "SET UP" menu is displayed. MENU PICTURE TIME SET UP FUNCTION SEL. + ENTER SET UP * ANTENNA : TV 2 * AUTOPROGRAM * FINE TUNE : 00 * CH GUIDE * CH GUARD SEL. + ENTER PICTURE ADJUSTMENT P. STD (Picture Standard) BUTTON By pressing the P. STD button on the remote control, you can sequentially select any one of the four possible picture standard presets. (1) CUSTOM mode (2) STANDARD mode (3) DYNAMIC mode (4) MILD mode 3. Press "0" twice then "CH GUARD" menu is displayed. Press 1 or 2 to set or cancel a channel. (BASS, TREBLE, BALANCE and MTS) 1 MENU PICTURE SOUND TIME SET UP FUNCTION SEL. Move the cursor to SOUND by pressing the CH / buttons and press the VOL + button. CUSTOM Select this mode to hear the adjusted sound you want. Select this mode to use the factory presetting. STANDARD 2 SOUND * 50 BASS * 50 TREBLE * 00 BALANCE * MTS : STEREO ON AIR SEL. ADJ MUSIC Select this mode when listening to music Move the cursor to TREBLE by pressing the CH / buttons. MOVIE Select this mode when viewing a movie SPEECH Select this mode to hear voices clearly 3 TREBLE 50 Press the VOL + / - buttons. The sound level is adjusted. 24 25 SOUND ADJUSTMENT MTS 1) USING MTS BUTTON : METHOD 1 Your TV set incorporates an MTS (Multichannel Television Sound) decoder to receive stereo broadcasts and any accompanying SAP (Second Audio Program), such as a bilingual broadcast. Press the MTS button Whenever this button is pressed, the reception mode will be changed as follows. STEREO SAP MONO SOUND ADJUSTMENT MTS 2) USING SOUND MENU : METHOD 2 1 MENU PICTURE SOUND TIME SET UP FUNCTION SEL. Move the cursor to SOUND by pressing the CH / buttons and press the VOL + button. The " ", " " symbols indicate that MTS mode is being broadcasted. STEREO symbol (RED color) SAP symbol (RED color) 2 ", " " symbols are SOUND * 50 BASS * 50 TREBLE * 00 BALANCE * MTS : STEREO ON AIR SEL. + SET Move the cursor to MTS by pressing the CH / buttons. When the power is switched on or channel is changed, the " automatically displayed, depending on the current broadcast. TV 2 3 NOTES If the received signal is weak, noise may be heard. [. . . ] Batteries are weak, dead, or inserted improperly. Confirm there are no obstructions between the remote and the TV. Sleep Timer , On Timer or Off Timer are set; Station has stopped broadcasting. THE SANYO COMFORT WARRANTY COLOR TELEVISION WARRANTY APPLICATION New, unused Sanyo Color Television products purchased in Canada through a Sanyo authorized dealer are warranted against manufacturing defects in materials and workmanship for ONE YEAR for parts and labor, from the date of purchase by the original retail purchaser. This warranty only applies in favor of the original retail purchaser of the warranted product. [. . . ]