User manual SANYO AVM-27D11

[. . . ] TABLE OF CONTENTS Introduction Safety Instructions Locations of Controls Use of Remote Control Antenna Connections Cable TV Connections Video/Audio Connections Basic Operation Basic Menu Operation Set-Up Antenna Selection Auto Channel Programming Manual Memory (Add/Delete) Fine Tuning Channel Guide Channel Guard 2 3 4 5 6 7 8 10 11 13 Picture Adjustment P. STD Button Manual Adjustment 21 Sound Adjustment S. STD Button Sound Menu MTS 24 Clock/Timer Functions Picture-in-Picture (AVM-27D11 only) Other Useful Functions Reception Disturbance Care and Maintenance Troubleshooting Guide Warranty 28 32 34 38 39 39 40 41 1 INTRODUCTION Congratulations on your purchase of this Sanyo MTS stereo television. The stereo speakers are front-mounted at the left and right sides of the TV screen for better stereo effect, delivering a high audio output of 24 watts (total). With over 500 lines of horizontal resolution via the built-in S-video jack, pictures from DVD will be reproduced in amazing detail. SAFETY INSTRUCTIONS ANTENNA Unless your TV is connected to a Cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for the best performance. However, if you are located in a strong signal area that is free from interference and ghost conditions (multipath), an indoor antenna may be sufficient. Other Features 181-channel cable-compatible frequency synthesizer tuner with built-in MTS decoder 2 sets of A/V inputs (1 set each on front and rear panels) Picture-in-Picture (1-tuner) (AVM-27D11 only) Clock and Sleep / On-Off timer Multi-color on-screen menu/display in English, French or Spanish High-contrast dark picture tube Closed-captioning decoder Audio out jacks Parental channel control (Channel Guard) Auto channel programming Automatic power shut-off in the absence of a signal Remote control with MoonGlowTM keys for easy operation in a darkroom (uses 2 x AAA batteries, not incl. ) S-VHS Input. [. . . ] SET/CANCEL menu is displayed. CHANNEL GUARD CH GUARD 1. CATV 36 MODE CUSTOM PICTURE Select this mode to use your customized picture setting. Select this mode to use the factory-presetting standard picture setting Select this mode -To emphasize more contrast. -To watch in the brighter (daylight) environments. Press a number (1 to 4) to select or cancel the current channel you are viewing. SELECT NO SET MODE SELECT NO CANCEL MODE STANDARD 1. 4. e. g. ) CATV 13 cancelled. DYNAMIC (The selected channel will change from cyan to magenta color) NOTES If you wish to set/cancel another channel, repeat procedure. Auto channel programming does not select guarded channels. MILD SELECT THE GUARDED CHANNEL 1. Press number buttons to select a guarded channel. NUMBER then "_" will change to "?". NUMBER is right, the desired channel will be received. NUMBER is wrong, "INVALID ID NUMBER" will display and the desired channel cannot be selected. 20 21 PICTURE ADJUSTMENT CUSTOM (MANUAL) ADJUSTMENT You can sequentially select and adjust one of five picture properties. Contrast, Brightness, Color, Sharpness or Tint. PICTURE ADJUSTMENT If you select this mode, you can directly adjust "BRIGHTNESS" without "MENU" option. Adjustment by "PICTURE" button. 1 MENU PICTURE SOUND TIME SET UP FUNCTION SEL. Move the cursor to PICTURE by pressing the CH / buttons and press the VOL + button. 1 PICTURE PICTURE 75 CONTRAST 50 BRIGHTNESS 50 SHARPNESS 50 COLOR 00 TINT SEL. ADJ Press the " PICTURE " button on the Remote Control. "PICTURE " menu is displayed. 2 PICTURE 75 CONTRAST 50 BRIGHTNESS 50 SHARPNESS 50 COLOR 00 TINT SEL. ADJ Move the cursor to CONTRAST by buttons and pressing the CH / press the VOL + / - buttons. 2 PICTURE 75 CONTRAST 50 BRIGHTNESS 50 SHARPNESS 50 COLOR 00 TINT SEL. ADJ Move the Cursor to BRIGHTNESS by pressing the CH / buttons and press the VOL + / - buttons. 3 CONTRAST 75 3 Adjust " CONTRAST " with VOL + / buttons. BRIGHTNESS 50 Adjust " BRIGHTNESS " by VOL + / buttons. 4 When you have finished contrast adjustment, press MENU repeatedly until the menus disappear. 4 PICTURE When you have finished BRIGHTNESS adjustment, press " PICTURE " repeatedly until the menus disappear. 22 23 SOUND ADJUSTMENT S. STD (Sound Standard) BUTTON There is a choice of five audio settings. By pressing the S. STD button, the five settings can be viewed in the sequence illustrated. Whenever this button is pressed, the mode will be changed as follows. CUSTOM STANDARD MUSIC MOVIE SPEECH SOUND ADJUSTMENT SOUND MENU You can sequentially select and adjust one of four sound properties. [. . . ] SANYO CANADA INC. 'S RESPONSIBILITY During the warranty period, SANYO Canada Inc. will repair, or at our option, replace a Color Television product which shows evidence of a manufacturing defect in materials or workmanship. Replacement PARTS are warranted for the remaining portion of the warranty period. WHAT IS NOT COVERED (a) Color Television products purchased outside Canada. [. . . ]