User manual SANYO AVM-3651G

[. . . ] If this equipment causes harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. [. . . ] (+p. 50) Chapter 4 Controlling the Projector Controls Click Control on the main menu. The setting method differs depending on the contents of the page. Click on the page number to change pages and select desired setting items. Please see the owner's manual of the projector to have the further information of each control item. Input This function is to select the input mode and source mode of the projector. Click Set button after selecting the input and source mode. Item Description Input. . . . . . . . . . . . . . . . . . . . . . . . . Input 1 : RGB(PC analog) RGB(Scart) RGB(PC digital) RGB(AV HDCP) Input 2 : Video Y, Pb/Cb, Pr/Cr RGB Input 3 : Video Y, Pb/Cb, Pr/Cr S-video The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page display. For further information , refer to the projector's owner's manual. When the projector is in standby, only the timer on the setting menu is effective; others are inactive. Controls System This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu button according to the input signal. Select a system and then click Set button. Available selection at the RGB(PC analog) input Item Description XGA1 . . . . . . . . . . . . . . . . . . . . . . . . Select an item [Image1 - Image10] from the pull-down menu and click Store button. Select an image mode from the pull-down menu and click Load button. There may not be available mode dependInput source ing on the input mode as Image mode Video Computer shown in the table left. 4 * Standard(AV) Cinema 4 * Standard(PC) * 4 The mark "4" means that the available image mode in the Real * 4 selected input source. The error message appears when Image1 - 10 4 4 selecting the disabled image mode indicated with "*". Controls Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume . . . . . . . . . . . . . . . . . . . Adjusts the sound volume from the speakers. (0 ~ 63) Mute . . . . . . . . . . . . . . . . . . . . . . . . . (ON, OFF) Menu This function is to control the On-screen menu of the projector. Switches menu on/off, moves menu selection (cursor) and executes the selected menu item. Item Description Display . . . . . . . . . . . . . . . . . . . . Switches the on-screen display menu on or off by clicking ON or OFF button. Moves cursor selection by clicking 7, 8, e and d buttons and executes the selected menu item by clicking button. PJ-NET ORGANIZER OWNER'S MANUAL [PLV-80/75 Series] ENGLISH Chapter 4 Controlling the Projector PC adjustment Click PC Adj. [. . . ] Please see item "Multi-control" for further information (+ p. 58). By registering the projector name and IP address with the DNS server, it can be accessed with the nickname from the any computer referred to the DNS server. Please consult your network administrator. Q How many numbers of the E-mail address can I register in the E-mail setting page. A You can register up to 10 addresses. Q&A Q Why am I not receiving E-mail alert messages?A Make sure that the registered E-mail address and SMTP server address are correct. [. . . ]