User manual SANYO AWM-2800

[. . . ] For safe and efficient operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The total number of tracks and total playing time on the disc appear. NOTE: If the disc is loaded with the label facing toward the unit, or if a badly scratched disc is loaded, "Cd" appears. If this occurs, load the disc correctly or replace the damaged disc. Press [FUNCTION] to select the "CD" function. Press [CD DOOR OPEN], "OPEN" appears. The CD door opens. The current track number and elapsed playing time are displayed. When the last track has been played, the player stops automatically. CAUTION: Please do not place anything in front of the unit. In such a case, the object in front of the unit may fall over or be knocked down. -E8- AWM-2800/US Eng page 9 4/16/04, 5:40 PM PROGRAMMED PLAY Up to 20 tracks on a disc can be programmed for play in any order. · First, select the "CD" function and load a disc that you want to program. · The tracks must be programmed in the stop mode. · The same track can be programmed more than once. NOTE: Programmed tracks cannot be deleted individually. Need help?Call 1-800-813-3435 -E9- AWM-2800/US Eng page 10 4/16/04, 5:40 PM LISTENING TO THE RADIO FREQUENCY UP/DOWN TUNING Automatic tuning TO PRESET STATIONS (Remote control only) Up to 20 FM and 12 AM stations can be preset. 3 2 1 2 5 8 FM MODE /REPEAT 2, 4 3 6 9 TUNER /BAND 1 1 2 5 8 FM MODE /REPEAT 4 3 6 9 TUNER 7 0 2 4 7 0 1 1. Tune in the station to be preset as described above. 1. Press [FUNCTION] (or [TUNER/BAND] on the remote control) to select AM or FM. Press [TUNING +] or [TUNING -] for at least 1 second to tune in a station. The unit will scan up or down the band and receive the next receivable station. · The [TUNING +] or [TUNING -] on the remote control can also be used. 3. Press [TU PRESET] to select the channel number to be preset. - TUNING + Manual tuning 1. Press [TUNING +] or [TUNING -] continuously until you are close to the desired frequency, then press it briefly until the desired frequency is displayed. Each time the button is pressed, the frequency changes in 200 kHz steps for FM and 10 kHz steps for AM. · The number buttons on the remote control can also be used. · If using the number buttons on the remote control, this step is not necessary. [. . . ] (See page E8. ) No sound. Volume control is set to minimum. The wrong function is selected. No sound from any function. Faulty speaker connections. The CD player will not operate. The disc is loaded with the label toward the unit. The sound from the CD player skips. The compact disc is dirty. The compact disc is scratched. Abnormal CD or display operation with the correct button settings. The memory must be reset. 1. While pressing [N] on the unit, press [I] on the unit for at least 1 second. [. . . ]