User manual SANYO CDP-M420

[. . . ] Sudden changes in the ambient temperature may cause condensation to form on the optical lens inside the unit. If this happens, take out the disc, leave the unit for about 1 hour, and then proceed to operate. This unit is equipped with a safety device which automatically turns the laser beam off when the disc compartment is opened. If a pin or other metal object should get inside the unit, however, this safety device may be deactivated. [. . . ] (Note: The unit cannot play back the music files added with "Track-at-Once". ) Music files recorded by "Packet Writing" cannot be played back. Some MP3 CDs can not be played back depending on the recording conditions. The CD-R/RW that has no music data or non-MP3 files can not be played back. Anti rolling shock function In the previous anti-shock function, when skips occurred while available memory runs out, then the sound would suffer some interruption. The new anti rolling shock function is designed to prevent skipping to the greatest extent possible instead of supplementing the skipped portion of the sound. This is achieved by expanding the memory capacity, and in addition full attention has been given also to increasing the unit's signal reading capability. Moreover, consideration has been given to eliminating the basic causes of skipping, both from the standpoint of horizontal shock and vertical shock. Use this function when listening during walk or playing in a car. When the i button is pressed first time, the anti rolling shock function turns on automatically. "ESP" appears on the display. Then "ESP" is remain standby when the buffer memory is full of next 45 seconds music data to Music CD and full of next 120 seconds music data to MP3 CD. Sound may skip or mute for a few seconds when you press the ALBUM/ASR button during play. Playing may stop when the unit gets strong shock even when the anti rolling shock function is on. When playing back MP3 CD, this function always works even if "ESP" doesn't appear. Auto power on function The power turns on automatically when i button is pressed. Auto power off function The power turns off automatically after about 60 seconds when all tracks on a disc have been played or when the n button is pressed once to stop play. 5) The HOLD switch disables the buttons from operating to prevent play from starting or stopping due to accidental operation. For normal use, leave the switch in the off position. To prevent battery drain: Set the HOLD switch to the on position when carrying the unit in a bag. To prevent play from being interrupted: Set the HOLD switch to the on position after starting play. If the operating buttons do not function when pressed . [. . . ] To record from the CD player Connect the patch cable from the LINE OUT socket on the unit to the LINE INPUT sockets on a cassette recorder. To hear through a pair of speakers Connect the patch cable from the LINE OUT socket on the unit to the AUX or CD INPUT sockets on a stereo system. 9) Dust on the pickup lens can lead to erratic operation and interruption of the sound during play. Blow the dust off of the lens using a camera lens blower (available at most camera stores). [. . . ]