User manual SANYO CLT2418 INSTRUCTION MANUAL

[. . . ] CLT-2422E-NEW 7/16/02 9:08 AM Page 1 2. 4 GHz Cordless Telephone with Caller ID CLT-2418 CLT-2422 Instruction Manual Important Charge the handset battery for 12 continuous hours prior to first use. SANYO Canada Inc. www. sanyocanada. com CLT-2422E-NEW 7/16/02 9:08 AM Page 2 TABLE OF CONTENTS INTRODUCTION . 23 Storing Caller ID entries in the directory . . 24 Deleting entries from the Caller ID list . [. . . ] For example, if the Caller ID number appears 1 - 4 1 6 - 2 2 2 - 5 5 5 5 but it is not a long distance number, press the 7-10-11 key until it 416-222-5555 shows 4 1 6 - 2 2 2 - 5 5 5 5 (without 1). Number Name The 7-10-11 key (or 7-10-11/HOLD key on the handset) lets you select how many digits of the number are displayed: 7 10 11 Caller ID list The incoming caller information transmitted from the phone company is received by your phone between the first and second rings and stored in the Caller ID list. If you answer a call before the second ring the caller information may not be stored. When the Caller ID list memory is full, a new call automatically NEW replaces the oldest call in memory. N E W appears on screen for calls received that have not been reviewed. Note: Check with your local phone company regarding name service availability. Important: You cannot receive Call Waiting Caller ID information while using the conference features. 3-digit area code + 7-digit telephone number. Long distance code 1 + 3-digit area code + 7-digit telephone number. Note: If a specific memory entry is longer than 15 digits, the first 15 digits show on the screen. To view the remaining digits, press 7-10-11. 4. 5. Use the CID or key to select desired Caller ID entry. S E L E C T M E M O 1 ­ 0 shows on the screen. If the memory location already contains Caller ID information, and REPLACE you want to replace the information, press MEM again. Press MEM again to confirm and save. 23 CLT-2422E-NEW 7/16/02 9:08 AM Page 24 CALLER ID FEATURES DIRECTORY Dialing a Caller ID number 1. Make sure the phone is OFF (not in TALK mode). Use CID or , to scroll to the desired Caller ID entry. Use the 7-10-11 key to show the phone number in proper digits if necessary. Press the TALK/CALL BACK on the handset or CALL BACK on the base. Deleting entries from the Caller ID list Use REDIAL/DEL to erase the entry currently shown on screen or all entries. Note: Deleting Caller ID entries on the handset and base is done separately. Make sure the phone is OFF (not in TALK mode). Use the CID or keys to find the entry you want to delete. While the entry is displayed, press REDIAL/DEL. Press REDIAL/DEL again to delete the entry. Make sure the phone is OFF (not in TALK mode). [. . . ] or any of its Authorized Dealers be liable for special or consequential damage arising from the use of this product. STATUTORY WARRANTIES ORIGINAL RETAIL PURCHASER'S RESPONSIBILITY You, the original retail purchaser, must present your original, dated bill-of-sale together with this warranty to SANYO Canada Inc. or to an authorized Sanyo Service Depot when you make a claim under this warranty. You, the original retail purchaser, are responsible for any costs of TRANSPORTING the product to and from SANYO Canada Inc. You also are responsible for the cost of any MAINTENANCE necessary in respect of the product. The above provisions do not preclude the operation of any applicable provincial statute which in certain circumstances may not allow some of the limitations and exclusions described in this Warranty. [. . . ]