User manual SANYO CLT9820

[. . . ] INSTRUCTION MANUAL CLT-9923 CLT-9926/9926W CLT-9936/9936G Main Features 900-MHz Technology Extended Range -The use of 900-MHz frequency band for signal transmission between base and handset means greater communication range compared to conventional 43 ­ 49 MHz cordless telephones. Ultra-Low Noise -The high frequency communication has also significantly reduced noise level. 40-Channel Auto/Manual Scan -Your new telephone uses one of 40 channels in the 900-MHz frequency band. It automatically selects a clear channel every time you receive or place a call on the handset. [. . . ] Then the next Caller ID entry shows on screen. Make sure the phone is off (not in TALK mode). Use the CID/VOL keys to display any Caller ID entry. Press and hold CHAN/DEL until the phone beeps and DELETE ALL?Press CHAN/DEL again to erase entire list. Inserting a pause in the dialing sequence Press PAUSE twice within one second to insert a delay in the dialing sequence of a telephone number when a pause is needed to wait for a dial tone. For example after you dial 9 for an outside line, or to wait for a computer access tone. Each pause counts as 1 digit in the dialing sequence. Reviewing and deleting directory contents 1. Press MEM, then use the CID/VOL keys to view the directory. While the desired entry is displayed, press CHAN/DEL key. Put the battery compartment cover back on. Note: If the handset battery is removed for more than 5 minutes, the directory memory and Caller ID memory will be erased. Charge the handset battery for 12 continuous hours prior to first use. The initial, uninterrupted battery charge is important for best performance. Caution: To reduce the risk of fire or personal injury, use a 3. 6V, 600 mAh battery. Power Failure During the period that the power is off, you will not be able to make or receive calls with the telephone. After a power outage, place the handset in the base for about 20 seconds to reset the digital security code. LCD SCREEN MESSAGES The following messages show the status of a call or of the phone. INCOMPLETE DATA Caller information has been interrupted during transmission or the phone line is excessively noisy. ENTER NAME Prompt telling you to enter the name for one of 10 directory locations. ENTER TEL NUMBR Prompt telling you to enter the telephone number for one of 10 directory locations. Prompt asking if you want to erase an entry in the Caller ID list or directory. [. . . ] This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. WARNING: Changes or modifications not expressly approved by SANYO could void the user's authority to operate the equipment. THE SANYO COMFORT WARRANTY WARRANTY APPLICATION Sanyo Communications products purchased new, unused in Canada through a Sanyo Authorized Dealer are warranted against manufacturing defects in materials and workmanship for ONE YEAR covering parts and labour, from the date of purchase by the original retail purchaser. [. . . ]