User manual SANYO DC-DB10

[. . . ] VARO - AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN. CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED PERSONNEL. - - - The apparatus shall not be exposed to dripping or splashing. Do not use where there are extremes of temperature (below 5 °C or exceeding 35 °C) or where direct sunlight may strike it. [. . . ] To skip to track 6 while track 3 is playing, press the e button repeatedly until "06" appears (in the track section) on the display. To skip back to track 3 while track 6 is playing, press the f button repeatedly until "03" appears. - The number buttons on the remote control can also be used for skip play. To skip to track 6 while one track is playing, press 0, then 6. Search (forward/reverse) If the e or f button is pressed during play, the player will search at high speed in the forward or reverse direction while the button is being pressed. When the button is released, normal play will continue. The current track number and elapsed playing time are displayed. When the last track has been played, the player stops automatically. 5 1465AUEnglish. indd 5 2008-7-28 10:00:19 Repeat / Random play Press the PLAY MODE button repeatedly before or during play to select various play modes available. Each time the button is pressed, the play mode changes as shown below: "appears " (Repeat one track) v Released (Normal play mode) " ALL" appears (Repeat all tracks) " " appears (Play all tracks randomly) v 3. The program number "02" blinks on the display. v 4. Repeat steps 2 - 3 to programme additional tracks. Press the i button to start programmed play. Random play will not function during programmed play. PROGRAMMED PLAY Up to 40 tracks on a disc can be programmed for play in any order. - First, select "CD" function and load a disc that you want to programme. Press the f or e button to select desired file. Repeat 2 ~ 4 steps to programme additional tracks. Press the i button to start programmed play. Press the n button at any time to stop the programmed play. - To cancel programmed play, press the n button twice during play. Note: Other various playback operations, please refer to the descriptions in CD PLAY (page 6). Note: For the MP3 and WMA mixed CD, both "WMA" and "MP3" remain on the display except playing mode. If current playing track is MP3 file, only "MP3" appears. If current playing track is WMA file, only "WMA" appears. Display selection The ID3-Tag is an information field for MP3/WMA. Album name, music title and artist name can be stored into the tag. Press the DISPLAY button on the remote control during play. [. . . ] The minute section blinks on the display. Press the e or f button to set the minutes. 9. "SET OFF TIMER" scrolls on the display. Press the TIMER button to complete the setting. [. . . ]