User manual SANYO DC-MX40I

[. . . ] Overheating will cause damage and shorten the life of the product. Keep the unit away from dust, moisture and water. Don't obstruct the ventilation vents on the equipment, for example with newspaper, table-cloths, curtains or soft furnishings. Minimum 10 cm distances around the apparatus for sufficient ventilations. [. . . ] Mains connection This unit was designed to operate at an AC 230 - 240V 50 Hz house current. Connecting this system to any other power supply could result in damage to the unit, which is not covered by your warranty. If this plug is not fit for your outlet, you should change your outlet by a qualified licensed electrician. 6 1. 3. Unwind the AC Power Cord completely. Insert the plug into any convenient AC outlet. As soon as the unit has been connected with the mains voltage, parts of the unit are in operation due to the standby function. Turn off the unit completely before pulling the mains plug out of the AC outlet. AUX connection 1. Connect a 3. 5mm stereo jack lead to the AUX IN socket and the other end to your preferred device. Play your device. BASIC OPERATION Adjusting the sound volume Turn the - volume + control to increase or decrease the sound level. BASSXPANDER button ON: Press the BASSXPANDER button once to active boost low frequency sound and the BASSXPANDER indicator will light up. OFF: Press once during ON mode and BASSXPANDER Indicator goes off. RADIO OPERATION 1. Press the PLAY MODE button once to active RPT mode, press the PLAY MODE button twice to active RPT ALL mode, Press the PLAY MODE button third time to active RDM mode, press the PLAY MODE button the fourth time to resume the normal playback. Repeat a track Select the track to be repeated and begin playback. The RPT indicator will show in the display and the selected track will be repeated continuously. The RPT ALL indicator will show in the display and all the tracks on the disc will be repeated continuously. Random playback The random playback feature allows you play all the tracks on the current disc in a random order. This function can be selected when the disc is playing or when in a stop mode. Press the PLAY MODE button third times to random play mode. The RDM indicator is shown in the display. 8 If necessary, press the PLAY/PAUSE button to begin playback. The player will randomly select a track to play from the disc. Note: In program mode, Random playback can't be selected. Clear play mode Press the PLAY MODE button fourth times to cancel the play mode and normal playback will resume. [. . . ] Press the STOP/EJECT mode, press the button again to remove the cassette. Note: When the end of the tape was reached, the cassette deck will stop automatically even at playback or recording mode. Preventing accidental erasure Whenever a recording is made, the sound previously recorded is erased automatically. To protect valuable recordings from accidental erasure, the unit and cassette are equipped with standard safety features. [. . . ]