User manual SANYO DCSTS750

[. . . ] FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. [. . . ] MO-SA: Monday to Saturday) Timer recording. Follow the procedure of timer recording on the previous page. On step 4, press [4] or [5] repeatedly until the desired setting appears. When you press [5] repeatedly, the indicator at DATE will change as follows, in this case the day is Friday. The current day (Friday) SU-SA (Sunday to Saturday) MO-SA (Monday to Saturday) One month later minus one day MO-FR (Monday to Friday) WKL-WE (Weekly Wednesday) WKL-TH (Weekly Thursday) Confirmation/Cancellation of the Timer recording 1. If the Timer has been activated, press [TIMER REC] to deactivate the Timer. The clock symbol ( ) on the FL display will disappear. To confirm Timer program: On step 2 on the previous page, select "TIMER REC SET" and press [ENTER]. Then the timer program list below will appear on the TV screen. DATE 26 WE START END CH 11:00PM 11:30PM125SLP 4/5/ENTER/CANCEL/MENU DATE WKL-WE START END CH 4. To cancel Timer program: Press [4] or [5] to select the unnecessary program, then press [CLEAR/CANCEL] to cancel the program. DATE START END CH 4/5/ENTER/CANCEL/MENU In case Timer programs-overlap Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below. 8 : 00 Program 1 Program 2 Deleted Parts Program 3 Non Recorded Portion Parts 4/5/ENTER/CANCEL/MENU 5. Press [SETUP/MENU] until the menu screen is cleared. 9 : 00 10 : 00 11 : 00 Recording Control Settings Prog. 1 Prog. 2 Prog. 3 2 Notes: The daily/weekly recording can be made continuously until the recording is canceled or the tape reaches the end. Load a cassette tape with the erase prevention tab intact. (The VCR indicator on the front panel will light. ) To VIDEO OUT To AUDIO (R) OUT To AUDIO (L) OUT Recording VCR (Main unit) VCR 2 AUDIO/VIDEO cables (not supplied) To VIDEO IN To AUDIO (R) IN To AUDIO (L) IN 1 4 Connection with Video camera Playback Camcorder Recording VCR (Main unit) 3 To AV Jack To VIDEO IN AUDIO/VIDEO cables (not supplied) To AUDIO (R) IN To AUDIO (L) IN 5 1. Press [TAPE SPEED] to select the desired tape speed SP or SLP. "SP" or "SLP" appears on the TV screen. 00 : 00 : 00 SP For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer's instructions. A typical camcorder dubbing hookup is shown above. Load a blank cassette tape with the erase prevention tab intact into the recording VCR. Load a previously recorded tape into the playback VCR or CAMCORDER. Press [TAPE SPEED] to select the desired tape speed SP or SLP. "SP" or "SLP" appears on the TV screen. 00 : 00 : 00 SP 2. The unit will change to the VCR mode automatically and the playback picture or sound will be duplicated on the video cassette tape. If you wish to stop a main unit disc, press [DVD] to change the DVD mode, then press [n]. [. . . ] 16. 9" x 3. 9" x 12. 5" (430 x 99 x 318 mm) Weight: Approx. 10. 4 lbs (4. 7 kg) Operating temperature: 5C to 40C (41F to 104F) Operating humidity: Less than 80 % RH Color signal system: NTSC Inputs VIDEO INPUT (RCA): 1. 0 Vp-p (75 ) AUDIO INPUT (RCA): 8 dB (50 k) ANTENNA INPUT: Antenna or CATV input (75 ) S-VIDEO OUT: Y: 1. 0 Vp-p (75 ) C: 0. 286 Vp-p (75 ) COMPONENT VIDEO OUT: Y: 1. 0 Vp-p (75 ) PB: 0. 7 Vp-p (75 ) PR: 0. 7 Vp-p (75 ) AUDIO OUT (RCA): 8 dB (1 k) VIDEO OUT (RCA): 1. 0 Vp-p (75 ) AUDIO OUT (6-CHANNEL): DIN 9-pin RF OUT: Channel 3 or 4 Outputs VCR Section Head system: Four head helical scan azimuth system Timer: 12-hour display type with AM, PM Tape speed SP: 33. 35 mm/sec, LP: 16. 67 mm/sec, SLP: 11. 12 mm/sec Tape width: 1/2 inch (12. 7 mm) Maximum recording time: SP: 2 hours (T-120), SLP: 6 hours (T-120) FF/REW time at 25C (77F): Approx. 1 minute and 48 seconds Antenna: 75 ohms (VHF/UHF) VHF output signal: Channel 3 or 4 (Switchable) Channel coverage: VHF: 2 13 UHF: 14 69, CATV: 1 125 (4A, AW, W+1 W+84, A-5 A-1) Frequency range: 20 Hz to 20 kHz (Hi-Fi), 100 Hz to 10 kHz (mono at SP) Signal to noise ratio: 70 dB (Hi-Fi), 42 dB (mono at SP) Dynamic range: More than 90 dB (Hi-Fi) Channel separation: More than 60 dB (Hi-Fi) Powered Subwoofer (ASX-3500) Subwoofer Continuous minimum sine wave RMS power output into 6 ohms at 70 Hz with no more than 10 % total harmonic distortion (with the other amplifiers off) . . . . . . . . . . . . . . . . . 75 Watts Satellite Speakers (Front Left & Right, Center, Surround Left & Right) Continuous minimum sine wave RMS power output per channel into 8 ohms at 1 kHz with no more than 10 % total harmonic distortion (with the other amplifiers off) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]