User manual SANYO DIR-2000

[. . . ] D I G I T A L TO DIR-2000 Digital Box Owner's Manual A N A L O G C O N V E R T E R "As an ENERGY STAR® Partner, Sanyo Manufacturing Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. " Printed in U. S. A. : 1JC6P1P0109 ­ ­ Service Code : 610 297 0548 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE ADHERE TO ALL WARNINGS ON THE PRODUCT AND IN THE OPERATING INSTRUCTIONS. [. . . ] Use the / keys to select the desired option: 4:3 or 16:9. NOTE: Normal is the only option available for NTSC channels. Figure 19--Aspect Ratio For Pix (Picture) Shape: I The PIX SHAPE key on the remote operates the same as the PIX SHAPE menu selection. Using the remote PIX SHAPE key allows you to quickly access the Pix Shape feature. If Pix Shape did not change the image appearance, make sure you are receiving a digital signal, and the correct feature setting is selected. Selecting the Pix (Picture) Shape for DTV Channels 1. keys to highlight the Pix Shape feature. I 3. Use the / keys to select the desired option: LetterBox, Cropped, Stretch, or Expand. Press the ENTER key. I Figure 20--Letterbox Setting (16:9 Reception & 4:3 Aspect Ratio) Figure 21--Expand Setting (4:3 Reception & 16:9 Aspect Ratio) (16:9 Reception & 16:9 Aspect Ratio) Selecting the Scan Mode for DTV Channels The SDB scan feature is designed to automatically adjust your TV's picture image depending on the signal received and tuner selected. For conventional TV the scan mode should be set to interfaced. For advanced television, the scan mode can be set to either interlaced or progressive. In order to received the best quality picture, match your settings with your equipment (DTV-advanced [digital] or NTSC-conventional [analog]). keys to highlight the Scan Mode feature. Need help? Visit our Web site at 3. Use the / keys to highlight the appropriate option: Interlaced or Progressive. Press the ENTER key. www. sanyoctv. com NOTE: Normal is the only option available for NTSC channels. Figure 22--Scan Mode selection 12 SDB Menu Operation--Channel Channel Category Use this feature to automatically search and scan for available channels including NTSC and DTV channels. The Channel Category adjustable features are: Search, Scan Memory, Initial Channel, and Display Banner. I QuickTips Some features and options may not be available at all times depending on your current signal reception, tuner, and channel selection. If you cannot scan some channels, check the CH map page and restart channel search operation or press the remote control RESET key to rescan active channels. Channel Up/down Scan keys move highlight in a continuous loop. Starting Channel Search NOTE: An initial search occurs during the first time setup procedure. Running a manual search should be necessary only when you want to search for channels that may have been added or to recover channels you deleted using the Scan Memory feature. The SDB will automatically start searching for available Digital DTV and NTSC (analog) channels. The NTSC signal search includes Cable and VHF/UHF channels. NOTES: NTSC Continuous Loop · The on-screen message will appear with arrows displayed across the bottom of the screen (to indicate activity) as the search process continues. (See Figure 24. ) This may take some time, so please be patient. During the Channel Search procedure, only the POWER key is operable. I DTV When the remote Channel (up/down) keys are pressed repeatedly faster than the video can be processed, the screen will change to a solid blue color with only a display of the channel number. · Figure 24--SDB searching for active channels Channel Scan Memory Channel scan memory is a list of active channels that you can scan through when using the CHannel Scan (up/down) keys. [. . . ] Press the RESET key twice (personalized settings Yes. It may have been the channel scan memory or V-Guide settings. will be reset to factory defaults). Blank Channel Map Page Start Channel Search. Is the channel map page still blank?Problem could be NO ATSC or NTSC signal received during channel search process. [. . . ]