User manual SANYO DP47840

[. . . ] install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. [. . . ] CHANNEL AND SIGNAL SETUP SCREEN The final setup screen displays analog and digital channels found as well as AV inputs detected. Press the INPUT key to select the correct AV input for the video source you wish to watch. Holding down the key displays the Input List. RESET Key--Pressing it twice restores your HDTV to its factory settings. While Off Timer is on-screen, press the "0" key to Set the amount of time (in 30 minute increments) at which the HDTV will turn off. NOTE: For channels 100 and up, press and hold the first number, then enter the remaining two numbers. The different settings either stretch, zoom, or fill the image on your screen. Bars may appear on top and bottom of your screen (or on left and right sides) depending on the broadcasted signal or program. Channel L M keys--Scan through the channels in the memory database. Display the On Screen menu and use the CURSOR LM keys to select Channel Setting. Digital Add-On ­ Searches digital off-air channels adding newly found digital channels to the channel map database. NOTE: Digital Add-On option is not available when the current mode is Cable. It also lists Analog channels that were not found, which can be added. Use the CURSOR LM keys to move the channel select bar through all enabled and disabled channels, or use the CH LM keys to skip all disabled channels. Therefore, when you search for cable channels, the database of antenna digital channels will be deleted. You will only be able to receive those ClearQAM channels your cable company provides. Use the CURSOR LM keys to select an AV input. press ENTER to disable (uncheck) or enable (check) the highlighted input. NOTE: At least one input must and will remain checked. Use this feature to establish either a Component or Composite connection to the VIDEO INPUT 2 jacks on your HDTV. Use the CURSOR LM keys to select the type of connection you'll use in VIDEO INPUT 2. Press ENTER, a blue mark will appear next to the selected option. [. . . ] Modes may include displaying only on the laptop screen, on both the laptop and the HDTV, or displaying only on the HDTV. NOTE: Fn key and function key symbols on the laptop's keyboard may vary from one brand to another. View pictures on your HDTV with the use of a USB mass storage device (not included. NOTE: A thumbnail hide icon will appear if a picture cannot be decoded or if no thumbnail data is available. [. . . ]