User manual SANYO DRW-1000

[. . . ] Disc Initialize menu appears. Disc Initialize Disc Initialize Select a mode. VR Mode Prev. Select Connection DISC Initialize DISC Finalize DISC Name DISC Protect Start Connecting VCR/DVD Recorder a Connect the "Antenna" or "Cable TV" to the "ANT. IN" jack on the VCR/DVD Recorder using a coaxial RF cable. [. . . ] c Use the v / V buttons to select DISC Finalize option, then press B. d Use the v / V buttons to select "Finalize", then press ENTER. Finalize Prev. Select DISC Initialize DISC Finalize DISC Name DISC Protect Finalize Unfinalize Connecting Optional Equipment a Connect the AV 1 IN jacks on the rear panel or AV INPUT jacks on the front panel to the Audio/Video out jacks on your external component using optional audio/video cables. b Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder/video deck to the front panel DV IN jack of this VCR/DVD Recorder. Finalize Do you want to finalize the disc?OK Cancel e Use the b / B buttons to select "OK", then press ENTER. Disc Finalization may take a few minutes to complete. f Press ENTER. Remain : 02 M 30 S Finalize Finalization complete. OK Note: See the Instruction Manual for advanced connections. P/N:(8)3840R-Q003X-(1E1/04) Printed in Korea STEP 2 Channel Setup STEP 3 DVD Recording Auto Channel Scan Follow these instructions to scan for channels if you are using an antenna or basic cable TV connection. b Use v / V to select the GENERAL option. d Use v / V to select the Auto Channel Set option. e Press B to highlight Start, then press ENTER to begin the channel search. The tuner will automatically cycle through all available channels in the area and place them in the tuner's memory. NOTE : To add or erase channels from memory, see the Instruction Manual for details. Prev. Add/Del Clock TV Aspect Ratio Progressive Scan Factory Setting TV CATV Step by Step DVD Recording Follow these steps to make your first DVD Recording. a Load a recordable DVD-R or DVD-RW into the disc tray. · If you are using a blank DVD-R disc, the disc will initialize automatically in Video Mode. · If you are using a blank DVD-RW disc, the "Disc Initialize" menu appears, prompting you to select a mode. [. . . ] Press PAUSE/STILL (X) again or REC (z) to continue the recording. · When recording is complete, press STOP (x). A message appears for a few moments while the VCR/DVD Recorder stops recording and adds the new title to the disc menu. [. . . ]