User manual SANYO DS19330

[. . . ] You can capture an image for the screen logo and use it for the starting-up display or between presentations. Simple Computer System Setting The projector has the Multi-scan system to conform to almost all computer output signals quickly (p. 36). Pointer Function Remote control pointer function. This function helps you to make a smart presentation on a projected screen. Useful Functions for Presentation Digital zoom function allows you to focus on the crucial information during a presentation (pp. 29, 43). Multiple Interface Terminals The projector has several interface terminals that can support various types of equipment and signals (p. 11). Security Function The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the side control or remote control (p. 59). [. . . ] Keep the keystone correction even when the AC power cord is unplugged. Release the keystone correction when the AC power cord is unplugged. Press the KEYSTONE button on the remote control to switch the Standard (for Vertical/Horizontal) /Corner correction adjustment. The Standard or Corner correction adjustment dialog box appears. Use the Point buttons to correct the Standard or Corner distortion. (p. 31) Ceiling Ceiling When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen. Rear Reset This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes. " 44 Video Input Video System Selection 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Input and then press the Point or the SELECT button. Use the Point buttons to select one from Images 1 to 10 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1-10) in the Image Mode Selection on page 46. Note: ·Noise reductionandProgressivecannotbeselectedwhen 480p, 575por720p isselected(p. 45). ·Noise reductioncannotbeselectedwhen1080pisselected (p. 45). A confirmation box appears and then select yes. 4 Video Input Screen Size Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Screen and then press the Point or the SELECT button Use the Point buttons to select the desired item and then press the SELECT button. Normal Provide the image to fit the screen size while maintaining the aspect ratio of input signal. Wide Provide the image at the 16:9 wide screen ratio. Custom Adjust the screen scale and position manually with this function. Press the Point button at Custom and the Custom is displayed on the screen, you can use the Point buttons to choose the item you want to adjust. Adjust the Horizontal/Vertical screen scale. When set to On, the aspect ratio is fixed. Scale V appears dimmed and becomes unavailable. [. . . ] For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or replaced by well-trained sales or service engineers. Do not attempt to install and replace the lens by yourself as it may cause injury. Lens Replacement Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector. [. . . ]