User manual SANYO DS19390

[. . . ] The Logo function allows you to customize the screen logo (pp. 49­50). You can capture an image for the screen logo and use it for the starting-up display or between presentations. Useful Functions for Presentation Motor-driven Lens Shift Digital zoom function allows you to focus on the crucial information during a presentation (pp. 29, 40). Security Function The Security function helps you to ensure security of the projector. [. . . ] Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. Normal SCREEN MENU Screen Menu icon Move the red frame pointer to the desired function and press the SELECT button. Provide the image to fit the screen size while maintaining the aspect ratio of input signal. Zoom Pan the horizontal direction of the image and cut the vertical direction of the image to fit the screen size (16:9). Only for 4:3 video aspect ratio signals. Natural wide Modify the 4:3 aspect ratio image to fit the screen size (16:9 aspect ratio) by stretching the image to make it look natural. Wide Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds. To display the Aspect dialog box, press the SELECT button at Custom again and then the Aspect dialog box appears. Adjust the Horizontal/Vertical screen scale. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes. " Quit Exit the Screen Size Adjustment Menu. SCREEN MENU Move the red frame pointer to a function and press the SELECT button. Ceiling Rear 44 Picture Image Image Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. Contrast IMAGE ADjUST MENU Image Adjust Menu icon Move the red frame pointer to the desired item and then press SELECT button. Press the Point 7 button to decrease contrast; press the Point 8 button to increase the contrast (from 0 to 63). Brightness Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Color Press the Point 7 button to decrease the intensity of the color; press the Point 8 button to increase the intensity of the color (from 0 to 63). Tint Press the Point 7 8 buttons to adjust the tint value to obtain proper color balance (from 0 to 63). Color Management The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required. [. . . ] Even though 99. 99% of the pixels are effective, a tiny fraction of the pixels (0. 01% or less) may be ineffective by the characteristics of the LCD panels. Each projector has its own characteristics. When projecting with several projectors on the same screen or side by side, you may recognize different white balance and color uniformity on each projector. Optional Parts The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. [. . . ]