User manual SANYO DSR-M814

[. . . ] e00_VDH_M814. book Page A Thursday, October 28, 2004 9:59 AM e00_VDH_M814. book Page 1 Thursday, October 28, 2004 9:59 AM PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Declaration of Conformity Model Number Trade Name Responsible party Address : DSR-M814 : SANYO : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818) 998-7322 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] (4) PREVIEW: Select this item to display the preview screen. (5) VIEW: Select this item to play back the video on the quad screen. (continued) OPERATION The page with the input alarm number is displayed. Date and time search Follow the steps below to play back a video recorded on the hard disk by specifying its date and time. [ ] button [ ] button [SEARCH] button [ ] button 1 2 Press the [SEARCH] button while the digital video recorder is recording or stopped. The <SEARCH> screen is displayed. Press the [ ] or [ ] button to select "TIME/DATE SEARCH". 24 e00_VDH_M814. book Page 25 Thursday, October 28, 2004 9:59 AM SEARCHING FOR RECORDED VIDEOS 4 Press the [ ] button, and set the date and time to search. Example: To search for the video from October 26 2004 20:00 6 Press the [ ] button to select "VIEW", then press the [ ] button. The preview screen image is played back in the quad screen. HI A 10- 2 6 - 0 4 2 0 : 0 0 : 0 0 (1) (2) (3) (4) (5) OPERATION (1) Press the [ month). ] or [ ] button to select "10" (the ] or [ ] ] ] The retrieved video can be displayed in the quad screen format without displaying the preview screen by entering the date and time, and selecting "VIEW". You can use the button operations to pause, fastforward or perform other operations on retrieved videos being played back. You can display quad screen videos in single screens. ( P. 13) (2) Press the [ ] button, and then the [ button to select "26" (the day). (3) Press the [ ] button, then the [ button to select "04" (the year). ] or [ (4) Press the [ ] button, and then the [ button to select "20" (the hour). ] or [ (5) Press the [ ] button to select "00" (the minutes), then press the [ ] button. The cursor moves to PREVIEW. 5 Press the [ ] button. If no video exists for the specified time The video closest to the selected time is displayed. To end search mode Press the [EXIT/OSD] button. 25 e00_VDH_M814. book Page 26 Thursday, October 28, 2004 9:59 AM 5. PREVENTING ACCIDENTAL OPERATION (KEY LOCK FUNCTION) 1 2 3 4 LOCK/REMOTE indicator OPERATION [ Follow the steps below to set the key lock function, preventing accidental pressing of the operation buttons. ] button Setting the key lock function With the digital video recorder recording or stopped, hold down the [ ] button for about 3 seconds. When the key lock is set, a confirmation tone sounds, and the LOCK/REMOTE indicator lights. The key lock setting is not released at power OFF. You cannot set the key lock during playback. Releasing the key lock function With the key lock function set, hold down the [ ] button for about 3 seconds. When the key lock is released, a confirmation tone sounds, and the LOCK/REMOTE indicator turns off. When the key lock function has been set, the buttons cannot be used for settings or operations. If you have already set the security lock, the password entry screen is displayed. ( P. 58) When the security lock is set, you cannot set the key lock alone. 26 e00_VDH_M814. book Page 27 Thursday, October 28, 2004 9:59 AM 6. COPYING RECORDED VIDEOS TO EXTERNAL MEDIA [MENU] button [ ] button [ ] button [ ] button [EXIT/OSD] button 1 2 3 4 CompactFlash card reader OPERATION CompactFlash card [ ] button CD-R/RW drive CD-R/RW Use the following procedure to copy recorded videos to a CompactFlash card or CD-R/RW. CompactFlash cards and CD-RWs can also be formatted as described below. 1 Press the [SEARCH] button while the digital video recorder is recording or stopped. The <SEARCH/COPY> screen appears. Do not turn off the power while a video is being copied. Data is written to CD-R/RWs using single-session recording. Once data has been written, therefore, it will not be possible to add additional data to a disc, even if free space is available. When a large amount of data is to be copied, it can be divided between a number of different discs or cards. At least 2MB of available space is required when copying to a CompactFlash card. The digital video recorder can automatically detect whether the copy destination is a CompactFlash card or a CD-R/RW disc. [. . . ] Insert a twisted-pair cable (sold separately) into the RS-485A, RS-485B and C (ground) terminals on the rear panel. Connect the RS-485A and RS-485B output to signal A and signal B respectively of the system controller. RS-485 7 8 Output for clock setting Common Input terminal used when recording with multiple digital video recorders connected. Output terminal used when recording with multiple digital video recorders connected. *2 Alarm input for channel 1 Alarm input for channel 2 Alarm input for channel 3 Alarm input for channel 4 Alarm reset input 9 10 NON REC OUT/SERIES REC OUT ALARM IN 1 ALARM IN 2 ALARM IN 3 ALARM IN 4 ALARM RESET ALARM OUT C WARNING OUT DISK FULL OUT Normal resistance 5V DC/57k, Low level active Normal open, Low level active Normal open, Low level active Normal open, Low level active Normal open, Low level active Normal open, Low level active Normal resistance 5V DC/57k, Low level active ABC APPENDIX 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Twisted-pair cable To signal B To signal A RS-485 Ground terminal 16 17 18 ALARM OUT Common System controller (sold separately) Twisted-pair cable Reduces signal interference caused by noise from other cables. For information about the system controller, contact your local dealer. Open collector (500 mA), Low level active Open collector (500 mA), Low level active Warning output*3 19 Recording area full warning *1 Used for twisted-pair cable connection. [. . . ]