User manual SANYO DVD-8000

[. . . ] Its performance is much better than that of any previous home video equipment. As the best signal source , it will give you the uppermost enjoyment! Built-in Dolby AC-3, MPEG, PCM etc. Hi-Fi, 96kHz/24bit audio digital processor. High-resolution component video output, support the future video equipment. [. . . ] Please refer to the Audio Setup in System Setup. AC POWER CONNECTION After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. NOTE: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. -11- System Setup Menu Operation 1. Press [SETUP] on the remote control to show the setup menu. The submenu of the selected item will be displayed below instantly. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] / [ ]to enter. Use [ ]/[ ] to select an option, then press [ENTER] to confirm it, or press [ ] to cancel. Then you can press [ ]/[ ] to continue to set other items in the submenu. Press [ ] to go back to the superior menu of the current one. Press [SETUP] again to exit the setup menu. Next time when you insert the same disc and close the disc tray to load the disc, the unit will play from the memorized point. OFF: Disable the last memory function. 2 AUDIO SETUP PAGE 2. 1 ANALOG AUDIO SETUP 2. 1. 1 DOWNMIX LT/RT: The 5. 1-channel audio is mixed into left channel and right channel and is output via the FL and FR speaker respectively. Then use the direction key [ ]/[ ] to set the distance difference. NOTE: The unit does not support delays for when the distance between the center or surround speakers and the listener are longer than that between the front speakers and the listener. In case the channel delay settings cannot match your speaker configuration, please set all distance difference to 0cm. Sub woofer 0cm 2. 5 EQUALIZER 2. 5. 1 SOUND MODE Select a sound mode in this item. 2. 5. 2 BASS BOOST Set it to ON to boost the bass sound. 2. 5. 3 SUPER BASS Set it to ON to get the super bass sound effect. 2. 5. 4 TREBLE BOOST Set it to ON to boost the treble sound. -14- System Setup 2. 6 3D PROCESSING 3D processing provides a virtual surround sound experience using just two speakers. 2. 6. 1 PRO LOGIC II Pro Logic II: This unit allows you to configure Dolby Pro Logic II to expand 2-channel source audio into full 5. 1 -channel surround sound. NOTE: Pro Logic II functionality is effective only when DOWNMIX is set to 5. 1CH and DIGITAL OUTPUT is set to SPDIF RAW. 2. 6. 1. 1 PRO LOGIC II This item is used to turn on or off the Pro Logic II processing. ON: Pro Logic II processing is always on. OFF: Pro Logic II processing is disabled AUTO: Pro Logic II processing is on only when Dolby Pro Logic II encoded content is detected. NOTE: When the Pro Logic II processing is turned off, all the following items (MODE, PANORAMA, DIMENSION and CENTER WIDTH) are unavailable. 2. 6. 1. 2 MODE This item is used to set the processing mode of Pro Logic II. MUSIC: The surround experience is tailored for multi-channel music playback. MOVIE: Emphasis is given to the center channel as two-channel audio is decoded and played back into your 5. 1 system. PRO LOGIC: This activates decoding and processing of the original Dolby Pro Logic processing with mono-surround channel. We recommend using the Dolby Pro Logic Movie mode in lie of this 4-channel surround format. [. . . ] [ ]/[ ]: Press to rotate the picture counterclockwise/ clockwise during the playback. [ ]/[ ]: Press to create a vertical/horizontal mirror image. MP3/CD OPERATION IMPORTANT INFORMATIONS - Copyright protection files cannot be played back. - Copyright protection files on a disc are skipped automatically when played back. -19- Troubleshooting Before resorting to maintenance service, please kindly check by yourself with the following chart. Symptom Cause(s) Remedy No Power The AC power cord is not connected to the power supply or is not connected to a power supply securely. The video cable isn't connected securely. [. . . ]