User manual SANYO DVP-P1

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. [. . . ] Press the shutter button to capture the first image. Press the shutter button again to capture the second and third images. The camera returns to normal preview display by pressing the e button. Press the e button again to switch back to album shot preview display. This shot can only be recorded if there are 3 shots recorded in each of the available frames. Recording Shots using Face Detection Technology Face Detection Technology can identify and focus on the human faces in the image. This advanced function simultaneously detects up to 10 human faces regardless of their position in the scene. Press the button, and select [ ] icon with the s / a buttons. With Face Detection turned on, the camera identifies main face (white frame) and subsidiary faces (gray frames). If the camera cannot detect and track any faces, there will be no frame shown on the screen. Press the shutter button halfway down to lock the focus. When the main face is in focus, the white frame simultaneously turns green. Turn the zoom lever to side enlarges the image. To return to normal magnification, turn the zoom lever to side. An [ ] icon is displayed with the video data. An [ ] icon is displayed with images which have an audio memo recorded. EN-26 Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor at the same time, which can let you quickly search for the image that you want. The images are displayed in the thumbnail display. Images that have been selected with the s / a / OZ / e buttons will be indicated by a yellow frame. When there are ten or more images, scroll the screen with the OZ / e buttons. Press the s / a / OZ / e buttons to select the image to be displayed at regular size. The selected image is displayed at its regular size. An [ ], [ ], [ ] icon may be displayed in a thumbnail. Removing Red-eye You can use this function to remove the red-eye effect after an image is taken. Select the image that you want to edit with the s / a buttons. Select [Fix Red Eyes] with the OZ / e buttons, and press the button. Select [Execute] with the OZ / e buttons, and press the button. [. . . ] Recharge the battery. No power supply. EN-44 Connecting to a PictBridge Compliant Printer If a printer that supports PictBridge is available, images can be printed by connecting the digital still camera directly to the PictBridge-compatible printer without using a computer. Connect one end of the USB cable to your camera. Connect the other end of the USB cable to the USB port on the printer. Select [PictBridge] with the OO / e buttons, and press the button. [. . . ]