User manual SANYO DWM-3500

[. . . ] INSTRUCTION MANUAL DWM-3500 DVD & Hi-Fi VCR Home Theater System SANYO'S HELP-LINE Call the toll-free number below if you have any difficulties operating this product. 1-800-813-3435 (Weekdays: 7:30 AM - 4:00 PM Central Time) Please Read This Manual. Because DVD is a new technology, we recommend that you read this manual carefully before connecting your DVD & Hi-Fi VCR Home Theater System and operating it for the first time. Keep the manual in a safe place for future reference. 1AD6P1P1855-DWM-3500, Issue Number 1 English 2B80201A [E] COVER 1 24/2/03, 7:12 PM SAFETY PRECAUTIONS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. [. . . ] To cancel Timer program: Press [4] or [5] to select the unnecessary program, then press [CLEAR/CANCEL] to cancel the program. DATE START END CH 4/5/ENTER/CANCEL/MENU In case Timer programs-overlap Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below. 8 : 00 Program 1 Program 2 Deleted Parts Program 3 Non Recorded Portion Parts 4/5/ENTER/CANCEL/MENU 5. Press [SETUP/MENU] until the menu screen is cleared. 9 : 00 10 : 00 11 : 00 Recording Control Settings Prog. 1 Prog. 2 Prog. 3 2 Notes: The daily/weekly recording can be made continuously until the recording is canceled or the tape reaches the end. During timer recording the automatic rewinding mechanism does not function. 1 CLEAR/ CANCEL 5 ENTER 4, 5 Notes: If there are other timer record programs remaining, [TIMER REC] must be pressed to reactivate the timer, otherwise the remaining timer record programs will be ignored. You cannot confirm the Timer program during timer recording operation. You can correct or cancel a programmed setting in program confirm mode. Need help?Call 1-800-813-3435 -E352B80201A [E] P27-37 35 24/2/03, 7:14 PM Stereo Recording and Playback The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. When a MTS STEREO broadcast is received, the word STEREO will appear on the TV screen and the program can be viewed or recorded in stereo. The Hi-Fi STEREO recording procedure is the same as for normal recordings. Separate Audio Program (SAP) Your VCR is fitted with a SAP broadcast system which enables you to switch to a separate audio program when viewing a selected channel. This function applies only when the program is broadcast in multi-languages through the SAP broadcast system. STEREO 3 1, 4 2 Note: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case the word "STEREO" will not appear and the sound will be in mono. Output selection When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO videotape, press [AUDIO OUT] to select how the audio will be heard through the speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the TV screen for several seconds. OUTPUT SELECTION STEREO L ch R ch MONO SOUND HEARD ON BOTH SPEAKERS STEREO LEFT CHANNEL AUDIO RIGHT CHANNEL AUDIO MONO 1. The "MENU" screen appears on the TV screen. MENU TIMER REC SET AUTO REPEAT ON ON SAP CH SETUP SYSTEM SETUP SPEAKER SETUP TVGuardian SETUP 4/5/ENTER/MENU OFF OFF 2. Press [4] or [5] to select "SAP". Press [ENTER] to select "ON". MENU TIMER REC SET AUTO REPEAT ON ON SAP CH SETUP SYSTEM SETUP SPEAKER SETUP TVGuardian SETUP 4/5/ENTER/MENU OFF OFF 4. Press [SETUP/MENU] until the menu screen is cleared. AUDIO OUT Listening to SAP When the VCR is turned on or a channel selection is made, make certain the letters "SAP" appears on the TV screen. This means that the "Separate Audio Program" broadcasting is available. Notes: When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. [. . . ] 25 Watts AUDIO INPUT (6-CHANNEL): DIN 9-pin SPEAKERS (Output): FRONT (L/R): 8 CENTER: 8 SURROUND (L/R): 8 Power requirements: AC 120V, 60 Hz Power consumption: 150 Watts Unit used: 6. 5" (16 cm) diameter, Cone type Dimensions (W x H x D): Approx. 9. 1" x 15. 4" x 13. 8" (230 x 390 x 350 mm) Weight: Approx. 22. 1 lbs (10 kg) DVD Video Player Section Laser: Semiconductor laser, wavelength 650 nm/790 nm Signal to noise ratio: 90 dB Frequency response: DVD: 4 Hz 22 kHz CD: 4 Hz 20 kHz Harmonic distortion: 0. 3 % (1 kHz) Dynamic range: More than 90 dB Satellite Speaker Front left, Front right, Center, Surround left, and Surround right speakers (SX-TS3000S, magnetic shield) Unit used: 3. 1" (8 cm) diameter, Cone type, Full range Maximum music power handling capacity: 50 Watts Nominal impedance: 8 Dimensions (W x H x D): Approx. 3. 7" x 5. 7" x 3. 4" (95 x 145 x 85 mm) Weight: Approx. [. . . ]