User manual SANYO FXCD-550

[. . . ] OPERATING INSTRUCTIONS FXCD-550 Full Panel Detachable FM Stereo/AM Receiver Auto Reverse Cassette Player Compact Disc Player ISO Mounting with Removable Trim Ring (English) OPERATING INSTRUCTIONS . 1~25 (Español) LIBRITO DE INSTRUCCIONES . 26~49 GB E SANYO MOBILE AUDIO MODEL FXCD-550 LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Cente r may be obtained by calling the toll-free number listed below. For product operation, authorized service center referral, service assistance or problem resolution, call CUSTOMER INFORMATION 1-800-421-5013 Weekdays 8:00 AM - 5:00 PM Pacific Time For accessories and/or parts not available from an authorized dealer, call PARTS ORDER INFORMATION 1-800-726-9662 Weekdays 8:00 AM - 5:00 PM Pacific Time THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA. [. . . ] Pressing the TAPE button during fast forward and rewind operation resumes tape playing. -11- LOCATING THE BEGINNING OF A PROGRAM (AMSS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5, 6 This system is equipped with a function that allows you to skip forward or backward to locate the beginning of a particular selection on the tape. (Automatic Music Select System : AMSS) 1 Press the AMSS button 2 Press the FF + button . to skip forward up to 9 selections from the current location on the tape. e. g. ) With "AMSS TAPE" displayed, press button three times. The system will search for 3 blank spaces between selections in the forward direction, then begin playing the third selection from the starting point. 3 Press the - REW button to skip backward to the beginning of the current selection, or up to 8 selections from the current location on the tape. e. g. ) With "AMSS TAPE" displayed, press button five times. The system will search for 5 blank spaces between selections in the backward direction, then begin playing the forth selection from the starting point. (The blank space before the current selection counts as one blank space. ) 4 To cancel AMSS mode, press button again. Notes · If AMSS detects 15 seconds of blank space, it will automatically advance the tape to the next selection. · AMSS may not operate properly if · A tape was recorded at a low level. · A tape has long, silent intervals. · A tape is a live recording. METAL PLAY MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 If a metal or high-position tape is used, press the MTL button is indicated. MTL SCAN MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Scan helps to find a program by playing about the first 10 seconds of each selection. Press the SCN button during play to start scan operation. To cancel scan, press the SCN button again. REPEAT MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 This operation makes it possible to listen repeatedly to a selection. "RP" is displayed, the selection playing will continue until RPT is pressed again. Notes RPT/SCN may not operate properly if · A tape was recorded at a low level. · A tape has long, silent intervals. · A tape is a live recording. -12- CD OPERATION 254 1 3 678 LOADING AND EJECTING THE CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1, 2 Insert a disc into the CD slot and the CD player will start playing. Press the eject button to eject a disc. CAUTION · This CD player is not designed for 8 cm CDs. [. . . ] Front Left Speaker 2-speaker System (White) (White/Black) (Gray) (Gray/Black) (Green) (Green/Black) (Violet) (Violet/Black) Left Speaker Right Speaker Do Not Connect Do Not Connect Front Right Speaker Rear Left Speaker Rear Right Speaker +12V Constant Power Supply (Yellow) +12V Accessory/Switched (Red) Ground Wire (Black) Power Antenna (Blue/Red) Amplifier Turn On (Blue/White) CAUTION · DO NOT connect any speaker wires to the metal body or chassis of the vehicle. · DO NOT connect the speaker common (-) wires to each other. · Connect each speaker wire directly to each speaker terminal. · All speaker common (-) wires must remain floating. 1 Antenna socket · Insert the plug from the antenna installed in your vehicle into this socket. [. . . ]