User manual SANYO HEC-RX1

[. . . ] INSTRUCTION MANUAL Relaxation Chair HEC-RX1 CONTENTS PAGE IMPORTANT SAFETY INSTRUCTIONS Åc Åc1 Å` 4 Åc NAME/FUNCTION OF EACH PART Åc Åc 5 Å` 6 Åc HOW TO PLACE THE CHAIR Åc Åc Åc Åc 7 Åc Åc Åc Åc HOW TO INSTALL THE HEAD REST AND PILLOW Åc Åc 8 Åc PREPARATIONS PRIOR TO USE Åc Åc Åc 8 Åc Åc Åc ADJUSTMENT OF CHAIR Åc Åc Åc Åc 9 Å` 10 Åc Åc Åc PROGRAM OPERATION Åc Åc Åc Åc Åc 11 Åc Åc Åc Åc Åc AFTER USE Åc Åc Åc Åc Åc Åc Åc Åc 12 Åc Åc Åc Åc Åc Åc Åc Åc MAINTENANCE PROCEDURES Åc Åc Åc Åc 12 Åc Åc Åc TROUBLE-SHOOTING Åc Åc Åc Åc Åc Åc 13 Åc Åc Åc Åc Åc SPECIFICATIONS Åc Åc Åc Åc Åc Åc Åc14 Åc Åc Åc Åc Åc Åc Be sure to read this manual thoroughly in order to ensure proper use. In particular, make certain to read the section "IMPORTANT SAFETY INSTRUCTIONS". Keep this manual in a safe place so that it can be found easily. 9BF-6-P111-348AB-0 0807 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance: All of the following information is important. Be sure to follow the instructions carefully. Do not allow any children to use the chair, play on or around it. Also, while in use, keep children away from the chair. [. . . ] Otherwise, an accident may happen or damage to the machine may result. Grounding Instructions This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product ­ if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in sketch A in following figure. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. GROUNDING METHODS Sketch A GROUNDED OUTLET GROUNDING PIN GROUND OUTLET BOX This appliance is intended for Household Use Only. WARNING This appliance is equipped with a PTC resetting protection device. This is a safety feature to protect the appliance from overload. If the appliance should suddenly stop and will not start, turn off the main switch and pull the plug off the socket outlet. Do not operate the appliance for at least 30 minutes. Failure to turn the appliance off may result in the appliance starting unexpectedly when the device resets. SAVE THESE INSTRUCTIONS 3 4 NAME/FUNCTION OF EACH PART Control Pillow Head rest ON/OFF lamp Illuminates when the control is on. Seat Back rest ON/OFF button Used for switching the operation ON/OFF. (See page 9) (See page 11) Control Arm rest STOP button Used if you have felt abnormal physical sensation or want to stop the operation immediately. (See page 11) Foot rest Cord Power plug PROGRAM SELECTION button Used to select from two kinds of courses "STRETCH" and "RELAX". (See page 11) RELAX lamp STRETCH lamp Check the accessories at first. Head rest ZERO-G button Used to set the back rest, foot rest, and seat to prearranged reclining angles. (See page 9) HOME POSITION button Caster Installation screws (2 screws) Used when moving the chair. (See page 7) Used to return the back rest, foot rest and seat to home positions. (See page 10) LEG button Adjusts the angle of the foot rest. (See page 10) Pillow POWER switch Used to turn on/off the power source. [. . . ] (They will not affect the function, etc. ) ÅE Sound of air bags Å@ "Pusshu" sound (Change valve sound) Å@ Hissing sound (Exhaust sound) Å@ "Buu" sound (Sound of pump operation) Å@ "Pako" sound (Sound when the air bag fills out) ÅE Wobbling foot rest and seat ÅE Unsteadiness when reclining ÅE "Gee" sound when reclined ÅE "Gee" and "Bee" sound of pump operation Dimensions Weight Upholstery Reclining angle Reclining method Air pressure Type of Trouble Operation failure Check points Check that the power plug is securely plugged into the outlet. Check that the POWER switch is set to the ON position. Countermeasure Push the power plug into the outlet securely. (See page 8) The chair stops in the middle of operation. Impossible to raise and lower the foot rest. [. . . ]