User manual SANYO LCD-47XR8DA

[. . . ] Only using furniture that can safety support the television. Ensuring the television is not overhanging the edge of the supporting furniture. Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support. Not standing the televisions on cloth or other materials placed between the television and supporting furniture. [. . . ] However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound effect, use Fine Tune. ATV Manual Tuning 1 2 3 Navigate to ATV Manual Tuning submenu, highlight Current CH item, press 3 a channel you want to perform fine or4 to select tune. Press 6 to select Fine-Tune item, and then use 3 to or4 button fine tune until the best possible picture and sound are obtained. During the process, press EXIT to exit, and RED button to save the effect. Note Storage To Color System Audio System Current CH Search Fine-Tune Frequency Exit SAVE 1 PAL BG 1 445. 25 MHz Select = only for analog TV program. Fine Tune is Setting Audio System Normally it is unnecessary to set audio system. However, if abnormal sound occurs, you may try to adjust the audio system. ATV Manual Tuning Storage To Color System Audio System 1 PAL BG 1 1 2 3 Navigate to ATV Manual Tuning submenu, press 5 or6 to highlight the Audio System item. Press EXIT to exit the menu screen directly. Current CH Search Fine-Tune Frequency Exit SAVE 445. 25 MHz Select 16 Memorizing the Channels (Continued) Labeling Channels If required, you can give a name to the programs. Picture Sound Time Option Lock Channel 1 2 3 4 5 Press MENU and the main menu screen displays. or4 to select to access the Press 6 Programme Edit item, press 4 or5 to select or OK to open the Programme Edit menu. Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Select Move Menu Return Within the program list, press 6 a channel you want to or5 to select edit, press GREEN button to start to label. Use 6 character to input, use 3 the cursor. or5 to select or4 to move To delete the inputting, please press RED button. After finishing inputting, press OK to confirm. Press RED button again to finish the delete. Repeat the above steps for more channels you want to delete. TV 1 S-03 2 C-42 3 S-04 4 C-04 DEL DEL NAME MOVE SKIP Fav. List Note = Edit menu has more than one page, you may press5the page upward or downward. If the Programme or6 to scroll = The deleted channels cannot be found unless you perform a channel search again. 18 Channel and Program Selection Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capable of receiving both traditional analog channels and digital channels. When watching digital TV program and you want to listen to radio program, simply press TV/Radio button to switch. To return to TV program, press TV/Radio button again. (When watching analog TV program, the TV/Radio button does not work. ) The TV allows channel and program selection in the following ways: Method 1-- Using CH Press the CH CH or CH Note = By using CH or CH or CH to cycle among all available channels. The skipped channels can not be selected by button. or CH , you can not select analog channels in DTV mode, or digital channels in ATV mode. Method 2-- Using RECALL button Press RECALL to switch to the previously tuned channel. Press RECALL again to switch back to the currently tuned channel. Note = will not work if no channel has been changed after TV is turned on. RECALL Method 3-- Using 0 ­ 9 and OK button Press the 0 ­ 9 number buttons to input a channel number, then wait for some seconds or press OK to go directly to that channel. [. . . ] Adjust the color saturation in the video setting. Try another channel; it could be station trouble. Move the TV away from noise sources such as cars, neon signs, or hair dryers. Using a highly directional outdoor antenna or a cable may solve the problem. [. . . ]