User manual SANYO LCD22VT10DVD

[. . . ] INSTRUCTION MANUAL LCD-22VT10DVD(C) LCD TV WITH DVD PLAYER Before connecting, operating or adjusting this product, please read the manual completely. Please keep this manual for future reference. Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] No new software was found" appears on the screen if no new software is found. English - 17 - Preferred Language By pressing the " " or " " buttons the preferred audio description language is being changed. This setting can be used, only if it is available. Use " " or " " buttons to highlight the menu item that will be adjusted and then press " " or " " button to set. · Audio Language is used for selecting the soundtrack of a channels. Primary settings are the first priority when multiple choices are available on a broadcast. Secondary settings are the alternatives when the first options are not available. · Guide Language: If the received EPG data includes the selected guide language, EPG data language will be changed accordingly. ·Teletext language sets the desired teletext language. Media Subtitle: In order to display subtitles properly, use this setting to select a movie subtitle language. By pressing " " or " " button, select the desired language option. Standby Search (*) (*) This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland. Use " " or " " button to select Standby Search and then press " " or " " button to set this setting as On or Off. If you change Standby Search to Off, this function will be unavailable. To use Standby search please make sure that you select Standby Search as On. Active Antenna (*) Use " " or " " buttons to highlight Active Antenna option. When antenna power option is set as On by pressing " " or " " button, +5V will be transmitted to the antenna output. This feature enables the use of active antenna. Note: Antenna power should be "Off" when standard antenna is used instead of the active antenna. Installation The Installation menu is mainly intended to help you for creating a Channel Table in most efficient way. Select Installation from the main menu by pressing " " or " " buttons. Language Settings In this menu the user can adjust the preferred language. Select "Language" item in the Setup menu and press OK button. Then language settings menu will be displayed. Automatic Channel Scan Automatic channel scan is started by pressing OK button while Automatic channel scan item is highlighted. The following message appears on the screen: You can set the desired language options by using " " /" " and " "/" " buttons. Note: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below: Highlight Yes or No by using " " or " " buttons and press OK button to confirm. If Yes is selected, automatic search starts. After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen: Language Settings . Highlight Yes and press OK button to search for analogue channels. [. . . ] · Make sure you have not switched the sound off accidentally. Distorted sound · Check that the appropriate listening mode setting is correct. English - 37 - No response from remote control · Make sure the remote control is in the correct mode. · Check batteries are fitted correctly. · Change the batteries. Title Number These numbers are recorded on DVD discs. When a disc contains two or more movies, these movies are numbered as title 1, title 2, etc. Track Number These numbers are assigned to the tracks, which are recorded on AudioCDs. [. . . ]