Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SANYO LNSS01. We hope that this SANYO LNSS01 user guide will be useful to you.
Lastmanuals help download the user guide SANYO LNSS01.
Manual abstract: user guide SANYO LNSS01INSTALL GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] LNS-M01 LNS-S01
LENS REPLACEMENT AND INSTALLATION PROCEDURE
NOTES ON LENS INSTALLATION
Lens installation should be performed by the qualified service personnel. It should be followed by this procedure precisely. [. . . ] D B
2
q IN CASE OF MODEL WITHOUT LENS A
D
Fig-1
LOWER LENS COVER
REMOVE THE COVER PLATE OF THE LENS COVER. (See figure-2) Remove 2 screws and pull down the plate. (At the step 4 , insert the light-block sheet in the same position as the removed cover plate has been placed. Two screws are not used. ) Use the light-block sheet included with lens. Set the light-block sheet, so that the large rounder side is set over the lens. Set the light-block
sheet, so that the large rounder side is set over the lens.
SCREWS
Fig-2
COVER PLATE
p Figure shown inside of the cabinet.
LENS MOTOR (D)
q IN CASE OF MODEL WITH LENS REMOVE THE LENS. Remove the connector "K16B" of the circuit board. Loosen the A, B wire holder and remove the lens motor lead. Remove screws D (4 screws) which fastens the lens and remove the lens.
(D)
(D)
(D)
B A WIRE HOLDER LENS MOTOR LEAD CONNECTOR " K16B"
Fig-3
3
INSTALL THE LENS. (See figure-4, 5. )
LENS MOUNTING BRACKET
1. Mount the lens at the lens mounting bracket with screws (4 screws) included with the lens. Use the driver included with the lens to fasten the screws . [. . . ] (See figure-1)
When in install the both upper and lower lens covers, put the light-block sheet through the lens and install the sheet so that it should be placed in the guide slot of the lens cover. If the installation of the light-block sheet is incorrect, there will be the space between lens and the lens cover, so that it will be the cause of leakage of light or the dust entering at the main cabinet. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO LNSS01
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO LNSS01 will begin.
