User manual SANYO MCO-19M UV BROCHURE

[. . . ] SterisonicTM GxP Series Cell Culture Incubators CO2 Incubators MCO-19AIC(UVH) MCO-19AIC(UV) MCO-19AIC CO2 /O2 Incubators MCO-19M(UVH) MCO-19M(UV) MCO-19M Features: · The industry's most complete cell culture solution for highly regulated applications or conventional incubation. · Safe, effective and documented two-hour in situ H2O2 decontamination for the fastest turn-around. www. sanyobiomedical. com My Life. My Choice. MCO-19AIC MCO-19AIC(UV) MCO-19AIC(UVH) MCO-19M MCO-19M(UV) MCO-19M(UVH) SterisonicTMGxP Series Cell Culture CO2 and CO2 / O2 Incubators The industry's most complete cell culture solution for highly regulated applications or conventional incubation. Now with safe, effective and documented two-hour in situ H2O2 decontamination for the fastest turn-around and maximum availability. [. . . ] Microprocessor Controller Floor Variable Outer door Variable Side, top and rear walls ­­ Side, top and rear walls, door ­­ Direct Heat and Air JacketTM Heating System The patented Direct Heat and Air JacketTM surrounds the inner walls with a natural convection airflow that converts to radiant wall heat through thermal conduction to achieve accurate, uniform and highly responsive temperature control within the chamber. · The microprocessor controller directs proportional distribution of power to independent heating sources surrounding the chamber. · Arranged in three zones, these sources include the side, top and rear walls, the chamber base and the outer door. · Each zone is controlled by the microprocessor which manages continuous feedback from the incubator chamber sensors. The patented Direct Heat and Air JacketTM heating system distributes proportional energy to the interior chamber through a natural convection air jacket surrounded by a high density insulation to protect against ambient temperature fluctuations H2O2 Decontamination The unique SterisonicTM GxP H2O2 decontamination system limits downtime to less than three hours when total chamber decontamination is desired. · All interior components and CO2 sampling loop are sterilized in situ; no need for removal and autoclaving. · Available as standard on the MCO-19AIC(UVH) and MCO-19M(UVH); optional on the MCO-19AIC(UV) and MCO-19M(UV). · Following decontamination, SANYO Active Background Contamination ControlTM fights contamination while cell culture protocols are in process. SafeCellTM UV System Sterisonic GxP Models ­UVH and ­UV include SafeCellTM UV contamination control technology based on an integrated combination of narrow bandwidth, ozone-free ultraviolet light, ceramic infrared CO2 control, inCu saFeTM copperenriched stainless steel alloy interiors and Direct Heat and Air JacketTM heating managed by a microprocessor controller. 8 SterisonicTM GxP Series Cell Culture Incubators www. sanyobiomedical. com SterisonicTM GxP Design and Technology These incubators offer the industry's most stable cell culture environment and are useful for the most critical applications where continuous contamination control is essential to cell viability. SANYO SafeCellTM UV Series CO2 incubators offer significant economic benefits by minimizing interruptions for decontamination, by improving cell culture growth and expression under stable, repeatable conditions, and by minimizing the potential for product loss. · SafeCellTM UV includes a programmable ultraviolet lamp, isolated from cell cultures, that sterilizes conditioned air and humidity reservoir water to prevent contamination without affecting cell cultures in vitro. · SafeCellTM UV inhibits the growth of mycoplasma, bacteria, molds, spores, yeasts and fungi without costly HEPA filter air scrubbers which accumulate contaminants in the chamber air. · High temperature decontamination systems, which can actually encourage in vitro growth of heat resistant thermophilic and hyperthermophilic microorganisms, are avoided. · inCu saFeTM interior surfaces provide natural resistance to contamination. · The SafeCellTM UV lamp reduces H2O2 to trace sterile water condensate following the seven-minute vapor decontamination process. · The ceramic-based technique is impervious to changes in temperature and relative humidity, highly stable during door openings, and sensitive to restoration of setpoint equilibrium when the door is closed. · The sensor maintains a continuous auto-zero function for accuracy. · Actual CO2 is displayed on the main control panel. · A CO2 sample port mounted on the incubator front permits convenient confirmation of chamber CO2 density. · An optional automatic CO2 switchover system is available; see Accessories. A two-stage regulator from the supply cylinder to the incubator is required; see Accessories. an optional second gas switchover system is available for CO2. · Cabinet based on MCO-19 platform with inCu safeTM copper-enriched stainless steel chamber, continuous contamination control, patented D. H. A. multi-point, air-jacketed temperature control system, elevated relative humidity with integral water-level sensor. inCu saFeTM Construction for Germicidal Protection SANYO offers exclusive use of inCu saFeTM copper-enriched stainless steel alloy interior surfaces within a technical design created to eliminate contamination sources and to mitigate the effect of airborne contaminates introduced through normal use. [. . . ] For use in single or stacked installations. Full shelf TM inCu saFeTM Half Tray System Integrated Cooling Option Communications Port. Connector, cable and software not supplied. Located at rear of chamber, analog 4-20mA. [. . . ]